fig13

Phase-dependent materials design and characteristic properties of two-dimensional (2D) halide perovskite single crystals for optoelectronic applications

Figure 13. (A) Schematic diagram of 2D DJ perovskite single crystal photodetector. (B) I-V curves of the (BDA)PbI4 single crystal photodetector under the dark and 462 nm illumination with intensities from 8.8 × 10-6 to 288.2 mW cm-2. (C) Linear dynamic range (LDR) of the device measured at 2 and 4 V biases. Reprinted with permission from ref.[73]: Copyright 2020, Wiley-VCH GmbH. (D) Current-voltage (I-V) curves of the (DMePDA)PbI4 (red) and (BDA)PbI4 (blue) devices under identical light conditions at 532 nm. Photocurrent response stability for the (E) (DMePDA)PbI4 and (F) (BDA)PbI4 single crystal detector under identical conditions in ambient air. Reprinted with permission from ref.[72]: Copyright 2024, American Chemical Society.

Microstructures
ISSN 2770-2995 (Online)

Portico

All published articles are preserved here permanently:

https://www.portico.org/publishers/oae/

Portico

All published articles are preserved here permanently:

https://www.portico.org/publishers/oae/