Recent advances of sweat sampling, sensing, energy-harvesting and data-display toward flexible sweat electronics
0 
, ... Abstract
Sweat contains diverse types of biomarkers that can mirror an individual’s health condition. The forefront research of sweat monitoring primarily focuses on sensing basic parameters, i.e., sweat rate and single electrolyte imbalances in controlled laboratory settings. However, recent works show the potential of sweat for the rich biomarkers in aspects of comprehensive health status display, timely safety alarming, and energy harvesting. The advances in wearable flexible electronics enable continuous, real-time, noninvasive detection of multiple sweat components, providing molecular-level insights into human physiology and psychology information; additionally, the efficient sweat extraction technologies of flexible electronics promote its application in energy harvesting, contributing to advancing a flexible sweat platform. This review comprehensively explores flexible sweat-based electronics, encompassing four key aspects: sweat sampling methods, sweat-based sensors, sweat-based energy harvesters, and sweat data display methods. Firstly, the traditional sweat-based platform is discussed in sweat sampling, sensing, and data analysis. Then, the development of wearable sweat sampling methods is discussed with a comparison of the traditional sweat collection methods. After that, the recent advances in sweat-based biosensors for monitoring diverse sweat analytes, such as the perspiration volume, glucose, lactate, and uric acid levels, are summarized. Subsequently, this review also highlights the recent progress and potential value of sweat-based energy harvesters in sweat-activated batteries and bio-fuel cells. Furthermore, multiple data display methods are proposed to achieve accurate feedback on health status, such as colorimetric techniques, light-emitting diodes, actuators, etc. Finally, this review concludes the main current challenges faced in practical applications of sweat-based bioelectronic systems and proposes a vision for the future evolution of this promising field.
Keywords
INTRODUCTION
Sweat, one of the most important body fluids, primarily consists of water (~99%)[1]. It also comprises metabolites (such as glucose, lactate, ethanol, etc.), ions [including potassium ions (K+), sodium ions (Na+), ammonium ions (NH4+), chloride ions (Cl-), etc.], hormones, small proteins and peptides, offering abundant biochemical information regarding human physiological and metabolic status[2-9]. For example, the concentration of Cl- is the benchmark for diagnosing cystic fibrosis; the level of Na+ is a key indicator for athletes as it guides the fluid intake strategies and helps maintain the balance between hydration and electrolyte levels[10-12]. Sweat glucose analysis has been employed to evaluate the glucose variation in blood for diabetes in clinical applications[13-15]. Recently, sweat is also utilized in clinical pharmacokinetics studies to examine the variation of some xenobiotics, such as drug molecules[16-18]. Among various biofluids, blood and interstitial fluid can be continuously monitored but are invasive and require additional processing[19,20]. Saliva, although easily obtainable, presents limitations such as reduced flow during the day, non-uniform composition across different parts of the mouth, and susceptibility to contamination[21]. Tear collection, on the other hand, is a little uncomfortable for participants and easily accessible. However, the quantity of tears collected is limited, and studies investigating their validity and reliability are scarce[22,23]. Additionally, collecting sweat samples is generally less challenging than urine collection[24]. Compared with other bodily fluids such as blood, interstitial fluid, urine, saliva, and tears, sweat holds significant promise due to the merits of safety, rapid processing, easy preparation, noninvasiveness, and so on[20,25-27]. Therefore, achieving rapid and accurate monitoring of sweat serves a significant role in health management and medical diagnosis. However, clinical use of sweat is presently limited by high costs, complex sampling procedures, significant time and manpower consumption, and the requirement of large-scale medical equipment, among other factors[28].
Advances in materials, biotechnology, and electronics have enabled flexible sweat electronics[27,29-31]. These devices, with sweat sampling, biosensors, energy harvesters, and data displays, enable noninvasive and continuous physiological monitoring[32-34]. They can harness energy from sweat using sweat-activated batteries (SABs) or supercapacitors (SACs)[35-37]. Flexible sweat electronics offer real-time health updates and clinical treatment alerts, making them increasingly important in healthcare[38-40].
Several works have been reported on the progress of sweat capture, collection, and sensing techniques[11,13,26,35,41-43], comprehensively summarizing sweat sampling and sensing. This review explores various aspects of flexible sweat electronics, including sweat sampling, sensors, energy harvesters, and data display [Figure 1]. It compares traditional methods with flexible sweat electronics, covers advancements in sweat biosensors, and discusses sweat-based energy harvesters such as sweat-based fuel cells, SABs and SACs. The review also addresses data display methods and highlights scientific obstacles and future opportunities. Overall, the main goal of this article is to thoroughly overview flexible sweat electronics that will facilitate personal health management and finally cause a paradigm shift in medical care.
Figure 1. Schematic diagram of flexible sweat electronics.
TRADITIONAL SWEAT-BASED PLATFORM
The sweat platform has made significant progress, with various methods used to collect sweat components. One typical traditional approach in the 1990s involved full body washing to assess overall sweat electrolyte loss. It avoids contamination and interference with natural sweating. During the study, participants engaged in exercise within a plastic isolation box on a cycle ergometer, dressed simply. After exercise, everything they touched was rinsed using deionized water to collect the electrolytes produced by their bodies. The difference in body mass before and after exercise was measured to determine the total sweat loss[44]. Another sweat collection method involved gathering samples from patients’ backs in a sauna. The process included cleaning the back with a moist towel, draping it with a hole and petroleum jelly, and collecting fluids in a pocket as individuals took a sauna bath. Sweat was then collected using a syringe and filtered through a cartridge-style filter [Figure 2A][45]. Absorbent patches were also introduced as an alternative to traditional collection methods. These patches efficiently absorbed sweat, allowing for local analysis through centrifugation. Subsequently, the sweat sample was tested using a laboratory device for Na+ and K+ detection [Figure 2B][46]. However, all these approaches are impractical for field research and treadmill protocols due to the controlled laboratory environment, complex processes, and other limitations[47]. Recently, Brueck
Figure 2. Traditional sweat-based platform. (A) Pocket-shape drape in sauna. Reproduced under the terms and conditions of the CC BY[45]. Copyright 2018, Author(s), published by PLOS; (B) Sweat extraction patched for Na+ and K+ analysis. Reproduced under the terms and conditions of the CC BY[46]. Copyright 2014, Author(s), published by Wiley-VCH; (C) Traditional sweat-based electronics in sweat sampling, sensing and data display method (i) and overall device view after the assembly (ii). Reproduced under the terms and conditions of the CC BY[48]. Copyright 2018, Author(s), published by MDPI.
Advancements in skin electronics have overcome challenges in previous sweat-based platforms, enabling real-time sampling, sensing, energy harvesting, and data display. This review will comprehensively explore the advancement of flexible sweat-based electronics and the progress achieved so far.
DEVELOPMENT OF FLEXIBLE SWEAT SAMPLING METHODS
Skin-electronics-based sweat sampling methods
Novel sweat collection methods for flexible electronics have been proposed to overcome limitations of traditional methods. One low-cost material with strong water absorption properties is the sponge. Huang
Figure 3. Material design for sweat sampling in flexible sweat electronics. (A) Sponge substrates for sweat collection. Reproduced with permission[49]. Copyright 2014, Wiley-VCH; (B) Hydrophobic/superhydrophilic textile for directed sweat transportation. Reproduced with permission[50]. Copyright 2019, Wiley-VCH; (C) Filter paper-based sweat volume colorimetric platform. Reproduced under the terms and conditions of the CC BY[52]. Copyright 2019, Author(s), published by Springer Nature; (D) PVA Hydrogel for sweat absorption. Reproduced with permission[54]. Copyright 2021, American Chemical Society. PVA: Polyvinyl alcohol.
In addition to the absorbing way to collect and analyze sweat, sweat guidance is also a very important alternative for flexible sweat sensing, which leads to multiple kinds of research on the epidermal microfluidic systems. Figure 4 displays wearable sweat sensor devices that gather, transfer, and hold onto perspiration inside the device using microfluidic technology. A sweatband fluidic platform [Figure 4A], can be worn comfortably on a person’s forehead to collect sweat effectively and do wearable analysis during indoor cycling. With the help of gravity and movement oscillation, perspiration that appears on a subject’s forehead might effectively flow into the channel and be carried to the chip surface[55]. A novel three-dimensional (3D) printed epifluidic platform, referred to as a “sweatainer” [Figure 4B], comprises an adhesive gasket, polydimethylsiloxane (PDMS) reservoir capping layer, and a microfluidic network with sealed and unsealed reservoirs. The platform allows sweat to enter through the intake, flow through microfluidic channels, and be collected using capillary burst valves (CBVs). Integrated ventilation holes prevent backpressure and ensure smooth flow[56]. Sweat loss from the microfluidic device outlet frequently causes a discrepancy between the actual and measured concentration of the electrolyte or biomarker. To address discrepancies caused by sweat evaporation, Zhang et al. developed a chamber with hydrophobic valves, allowing for reduced evaporation and contamination. The practical utility of these devices is demonstrated by real-time sweat loss measurements and pH analysis, with multiple chambers available for analyzing biomarkers such as chloride, pH, and glucose [Figure 4C][57]. Son et al. developed a patch with wettability patterned channels inspired by cactus spines. The patch features a hierarchical microstructured/nanostructured surface with wedge-shaped wettability-patterned channels. This design allows for efficient sweat transfer without retention inside the channels, resulting in higher sweat-collecting efficiency and faster sensing time [Figure 4D][58]. In order to facilitate efficient small-volume sweat collection and analysis during rest, Nyein et al. incorporated hydrophilic fillers into the sensing channel. This integration enhances the rapid uptake of sweat, reducing the necessary time for sweat accumulation and enabling real-time measurements [Figure 4E]. A microfluidic channel with pillars in the sweat collection center is designed to optimize the sweat flow conditions and enable a better sampling procedure for quick detection of reservoir filling[16].
Figure 4. Structural design for sweat sampling in flexible sweat electronics. (A) Wearable sweatband channel for sweat collection. Reproduced with permission[55]. Copyright 2017, American Chemical Society; (B) Sweatainer system for sweat collection. Reproduced under the terms and conditions of the CC BY[56]. Copyright 2023, Author(s), published by The American Association for the Advancement of Science; (C) The chamber with hydrophobic valves to reduce sweat evaporation and contamination. Reproduced with permission[57]. Copyright 2020, Royal Society of Chemistry; (D) Cactus spines inspired patch with wettability patterned channels. Reproduced with permission[58]. Copyright 2021, Wiley-VCH; (E) Hydrophilic fillers into the sensing channel to enhance the uptake of sweat. Reproduced under the terms and conditions of the CC BY[16]. Copyright 2021, Author(s), published by Springer Nature.
Sweat inducing methods
Regarding techniques for stimulating sweat production, exercise, such as running and cycling, is a commonly used method for sweat analysis [Figure 5A and B], where various devices monitor biological markers in sweat during physical activity[59,60]. However, some limitations remain, such as the inability to engage in strenuous exercise, inconvenience for individuals with mobility issues, and challenges for the elderly. Therefore, there is a need to explore alternative methods of inducing sweat for research and analysis.
Figure 5. Common ways to induce sweat. Physical activity such as (A) running. Reproduced under the terms and conditions of the CC BY-NC[59]. Copyright 2020, Author(s), published by The American Association for the Advancement of Science; (B) cycling. Reproduced under the terms and conditions of the CC BY-NC[60]. Copyright 2019, Author(s), published by The American Association for the Advancement of Science; (C) Schematic diagram of iontophoresis methods. Reproduced with permission[61]. Copyright 2017, National Academy of Sciences Publishing Group; (D) Tattoo-based iontophoretic-biosensor. Reproduced with permission[62]. Copyright 2016, American Chemical Society; (E) Triboelectric nanogenerator Enabled Sweat Extraction. Reproduced with permission[63]. Copyright 2023, Wiley-VCH.
Alternatively, wearable sensors can be engineered to use iontophoresis to locally induce sweating. This makes it possible to obtain equilibrium sweat without exercising, which makes it perfect for medical checks when a person is sedentary. Hydrogels with pilocarpine medication are applied and activated below the skin, prompting sweat gland activation, and then the wearable sensors detect the released perspiration
Recent advancements in wearable sweat devices have successfully integrated sweat sampling, storage, and analysis into multifunctional platforms. Here, we also present an extensive overview of the advantages and persistent obstacles related to various sweat sampling methods in Table 1[16,44-46,49,50,52,54-58,64].
Summary of sweat sampling methods
| Sweat sampling method | Sampling position | Advantages | Disadvantages | Application | Ref. | |
| Traditional methods | Whole body washdown technique | Whole body | ● Measuring body’s electrolyte loss in passive exposure | ● In a controlled laboratory environment ● Complex steps | Sweat loss, sweat electrolyte composition | [44] |
| Absorbent patch | Arm | ● No disruption to the regular perspiration process ● Low cost ● Flexible | ● Contamination from skin ● Need centrifuge extraction in Biochem Lab | Sweat Na+ and K+ analysis | [46] | |
| Macroduct | Arm | ● No sample leakage or contamination ● Unrestricted working environment | ● Possible analyte degradation between sampling and testing | Cystic fibrosis diagnosis | [64] | |
| Pocket-shape drape | Back | ● Reduce contamination | ● Complex steps ● Need a sauna environment | Sweat glucose detection | [45] | |
| Skin-electronics-based sweat sampling methods | Sponge | Arm | ● Collection of sweat through capillary forces without requiring intricate microfluidic handling systems | / | Colorimetric measurement of sweat components | [49] |
| Janus PE/NC textile | Upper body | ● Directional sweat transport properties ● Comparable water wicking and air permeability to traditional clothes | / | Human body moisture and thermal management | [50] | |
| Filter paper | Arm | ● Mass customization Low cost | ● Occlusive dressings can cause moisture buildup on the skin, potentially leading to sweat duct blockage and suppression | Colorimetric indicator of sweat rate | [52] | |
| PVA hydrogel | Fingertip | ● No requirement for intense exercise or iontophoretic sweat stimulation | ● Need a periodic blood calibration | Sweat glucose monitoring | [54] | |
| Sweatband | Forehead | ● Portable | ● Potential contamination | Sweat sodium monitoring | [55] | |
| Sweatainer | Arm | ● Multidraw simplifies collection of multiple sweat samples for analysis | / | Colorimetric assays for in situ biomarker analysis | [56] | |
| Microfluidic channel | Wrist, finger, arm | ● Continuous sampling and real-time analysis ● Convenient to mount on any part of the body | ● Reusability and durability | Sweat glucose, lactate, pH, Cl-, ethanol and levodopa monitoring | [16,57,58] | |
SWEAT-BASED BIOSENSORS
Eccrine sweat, excreted directly onto the skin surface, is easily accessible and noninvasive. It consists mainly of water, along with metabolites such as glucose, lactate, uric acid, electrolytes such as Na+, K+ ions, etc., making it relevant for assessing human health status[10,26,42,65]. Here, the concentration of common analytes in sweat (sweat volume, various ions, metabolites, nutrients, hormones, proteins, and so on) and their association with related diseases is summarized in Table 2[6,9,16,18,27,33,61,66-97]. For instance, an abnormal sweat rate may lead to dehydration, while deviations in K+ concentration from the normal range can indicate conditions such as hypokalemia, hyperkalemia, irregular heartbeat, arrhythmia, muscle cramps, and even renal failure[66-68,72,74]. The real-time detection of various physiological markers (glucose, lactate, uric acid, Na+, K+ and NH4+) can also provide insights into the emotional fluctuations of the human body. These findings underscore the significance of sweat-based biosensors[98]. Recently, numerous reviews have also provided summaries of the advancements in sweat-based sensors[28,99-103]. This review specifically focuses on discussing several noteworthy sweat sensors based on metabolites, ions, drugs, and sweat volume, as indicated in Table 3[18,54,61,81,97,104-109].
Analytes in sweat and related health status
| Analytes | Normal range in sweat | Related health status | Ref. | |
| Volume | Sweat rate | 0.72-3.65 mg·cm-2·min-1 | Dehydration | [66-68] |
| Ions | Na+ | 10-100 mM | Hyponatremia; hypernatremia; identification of dehydration; heat stress; dehydration | [68-72] |
| Cl- | 10-100 mM | Hypochloremia; hyperchloremia; cystic fibrosis diagnosis | [68,73] | |
| K+ | 1-18.5 mM | Hypokalemia diagnosis; hyperkalemia diagnosis; irregular heartbeat and arrhythmia diagnosis; renal failure monitoring; muscle cramps | [68,72,74] | |
| NH4+ | 0.1-1 mM | Changing from an aerobic state to an anaerobic state; hepatic disorder diagnosis | [75] | |
| Ca2+ | 0.41-12.4 mM | Hypocalcemia; hypercalcemia; chronic kidney diseases; mineral bone disorder; cirrhosis | [72,76] | |
| Zn2+ | 100-1,560 μg·L-1 | Diarrhea; pneumonia; liver damage; zinc poisoning | [77,78] | |
| pH | 3-8 | Cystic fibrosis; hydration; dermatitis; ichthyosis; fungal infections; wound healing | [33,68,69] | |
| Cd2+ | < 100 μg·L-1 | Respiratory tract, liver and kidney problems | [77] | |
| Hg+ | < 100 μg·L-1 | Hunter-Russell syndrome; minamata disease; acrodynia uremia | [77] | |
| Pb2+ | < 100 μg·L-1 | Lead poisoning; infertility; memory loss; high blood pressure | [77] | |
| Cu2+ | 100-1,000 μg·L-1 | Anemia; osteoporosis; heart and kidney failure; brain disease and disorder; Wilson’s disease, liver damage | [77] | |
| Metabolites | Glucose | 10-200 μM | Diabetes and prediabetes monitoring; hypoglycemia management | [61,79] |
| Lactate | 2-30 mM | Lactic acidosis diagnoses; tissue hypoxia; respiratory disease | [68,80,81] | |
| Urea | 1.8-46 mM | Kidney failure diagnosis; uraemia diagnosis | [82-84] | |
| Uric acid | 2-10 mM | Gout management; cardiovascular and kidney disease | [6,27,76] | |
| Nutrients | Ascorbic acid (vitamin C) | 10-50 μM | Uric acid stone diagnosis; scurvy diagnosis; chronic inflammation | [85] |
| Tyrosine | 0.2-0.4 mM | Metabolic disorders; neuropsychiatric and eating disorders; liver diseases | [6] | |
| Tryptophan | 0.055-0.08 mM | Inflammation-associated disorders | [86] | |
| BCAAs | 0.2-1 mM | Hepatocellular carcinoma; muscle wasting disorders; chronic renal failure | [87,88] | |
| Hormones | Cortisol | 0.1-20 × 10-3 mM | Pressure level monitoring; depressive disorder diagnosis; cardiovascular diseases | [27,89] |
| Testosterone | 0.8-1.6 × 10-6 mM | Depression | [90] | |
| Neuropeptide Y | 50-200 pg·mL-1 | Major depression disorder; management of chronic anxiety disorders | [91] | |
| Proteins | C-reactive protein | 4.2-250 × 10-9 mM | Chronic inflammation | [9,27] |
| Interleukin 6 | 5-15 pg·mL-1 | Insulin activity; immune responses in cancer therapy | [93] | |
| Interleukin 8 | 4.2 ± 1.7 pg·mL-1 | Role as a major inflammatory mediator; physiological homeostatic functions | [94] | |
| TGF-β | 3.7 ± 1.6 pg·mL-1 | Cell growth, differentiation to the regulation of immune responses | [94,95] | |
| Drugs | Levodopa | < 2.5 × 10-3 mM | Parkinson’s disease management | [16,27] |
| Acetaminophen | < 50 × 10-3 mM | Chronic liver disease | [27,96] | |
| Caffeine | / | Coronary syndrome; hypertension; depression | [18] | |
| Others | Ethanol | 2.5-22.5 mM | Alcohol consumption detection; alcohol intoxication diagnosis; alcohol cardiomyopathy diagnosis | [92] |
| Nicotine | / | Nicotine poisoning | [97] | |
Summary of technical capabilities of flexible sweat sensors
| Analytes | Recognition element | Sensing technique | Linear Range | Sensitivity | Whether to measure continuously | Ref. | |
| Glucose | Glucose oxidase | Chronoamperometry | 0-450 μM | 2.89 nA·μM-1 | No | [54] | |
| rGO/PU/Au | Chronoamperometry | 0.5 nM to 10 mM | 140 μA·mM-1·cm-2 | Yes | [104] | ||
| Lactate | Lactate oxidase | Chronoamperometry | 0-28 mM | 96 nA·mM-1 | Yes | [81] | |
| Lactate oxidase | Chronoamperometry | 0-15 mM | 90 nA·mM-1·mm-2 | Yes | [105] | ||
| Lactate oxidase | Potentiometry | 0-15 mM | 2.48 mV·mM-1 | Yes | [106] | ||
| Ions | Na+ | Na Ion-selective membrane | Potentiometry | 10-160 mM | 63.2 mV per decade | Yes | [61] |
| Na Ion-selective membrane | Potentiometry | 0.1-100 mM | 54.2 ± 1.3 mV | Yes | [107] | ||
| Cl- | Ag/AgCl electrodes | Potentiometry | 10-160 mM | 55.1 mV per decade | Yes | [61] | |
| Ag/AgCl electrodes | Potentiometry | 1-100 mM | -63.0 ± 2.4 mV | Yes | [107] | ||
| K+ | K Ion-selective membrane | Potentiometry | 0.1-100 mM | 56.8 ± 2.5 mV | Yes | [107] | |
| pH | Ion-selective membrane | Potentiometry | 4-7.5 | 50.1 ± 0.5 mV | Yes | [107] | |
| PANI | OCP | 4-8 | -33.82 mV·pH-1 | Yes | [108] | ||
| Drugs | Psychoactive drugs | Apt1, Apt2 aptamers | Potentiometry | 0.001 to 5 μM | / | Yes | [108] |
| Caffeine | Carbon nanotube/Nafion Film | DPV | 0-40 μM | 110 nA·mM-1 | Yes | [18] | |
| Nicotine | CYP2B6 | Chronoamperometry | 0-30 μM | 4.3 nA·mM-1 | Yes | [97] | |
| Carbamazepine | NiSe2 | Chronoamperometry | 50 nM to 10 μM | 65.65 μA·mM-1 | No | [109] | |
Metabolites detection
Among wearable sweat sensors, the detection of metabolites has seen significant advancements and widespread use. This capability offers valuable insights into body glucose levels, tissue hypoxia, body hydration, etc. Glucose and lactate are the two most studied metabolites providing physiological information on human health status. Sempionatto et al. developed finger-touched sweat electrochemical sensors featuring a PVA hydrogel as the sweat collection component. These sensors employ Prussian Blue (PB) as a transducer to identify the hydrogen peroxide generated through the enzyme-catalyzed glucose reaction. With the integration of an individualized sweat-to-blood conversion algorithm, these sensors enable fast, dependable, and user-friendly self-assessment of glucose levels in fingertip sweat [Figure 6A][54]. A textile-based sweat glucose sensor is presented by Toi et al., which utilizes a unique wrinkled, stretchable nanohybrid fiber (WSNF) as the electrode. This WSNF comprises a hybrid fiber constructed of reduced graphene oxide (rGO) and polyurethane, with Au nanowrinkles partially covering its surface. Because of the synergistic impacts of these nanowrinkles and the oxygen-containing functional groups in the rGO-supporting matrix, the WSNF demonstrates remarkable electrocatalytic activity. These effects significantly augment the dehydrogenation stage during glucose oxidation. Consequently, the WSNF electrode demonstrates a remarkable response to glucose, featuring a sensitivity of 140 μA·mM-1·cm-2 and a detection limit of 500 nM [Figure 6B][104].
Figure 6. Flexible sweat sensors for metabolite monitoring. (A) A fingertip touch sensor for sweat glucose monitoring. Reproduced with permission[54]. Copyright 2021, American Chemical Society; (B) A textile-based sweat glucose sensor. Reproduced with permission[104]. Copyright 2019, American Chemical Society; (C) Sweat sensor for lactate detection. Reproduced under the terms and conditions of the CC BY[81]. Copyright 2016, Author(s), published by Springer Nature; (D) Wireless wearable electrochemical sensing platform for continuous lactate monitoring. Reproduced with permission[105]. Copyright 2022, American Chemical Society; (E) Glucose and lactate monitoring by self-powered biosensor. Reproduced with permission[106]. Copyright 2021, Springer Nature; (F) Skin-integrated electronics for sweat uric acid detection. Reproduced under the terms and conditions of the CC BY[76]. Copyright 2023, Taylor & Francis Online.
The ability to detect fluctuations in lactate levels in real-time can indicate physical stress and may aid in identifying shifts from aerobic to anaerobic states when there is an oxygen shortage and need for extra energy, as happens during exercise. Figure 6C showcases a lactate sensor patch created through screen printing on a flexible polyester sheet, designed to perfectly adapt to the intricate contours of the skin, guaranteeing a distinct signal. The lactate measurement part of the patch features a modified electrode coated with a bio-compatible layer [lactate oxidase (LOx)-modified PB], with a sensitivity of 96 nA·mM-1[81]. Saha et al. introduced a seamless platform for continuously monitoring sweat lactate, which integrates an osmotic hydrogel for sweat collection, a microfluidic channel made of paper for sweat transportation, a screen-printed electrochemical sensor for lactate detection, and a tailor-made wireless wearable potentiostat system. At rest, the osmosis hydrogel enables the collection of sweat samples without external power. Simultaneously, the continuous evaporation in the paper channel allows for prolonged sensing using fresh sweat. Through strategic placement, lactate sensors offer nearly instant sensing capabilities using minimal sweat volume, while the custom-built potentiostat system allows ongoing monitoring while consuming minimal power [Figure 6D][105]. Based on biofuel cells (BFCs), Huang et al. presented an enzymatic self-powered sensor that enables in situ detection of glucose and lactate in sweat. The ultra-thin, flexible PDMS microfluidic channels collect sweat effectively and retain stable performance even when stretched up to 30%. The soft sweat sensors exhibit a sensitivity of 2.48 mV·mM-1 for lactate detection and 0.11 mV·μM-1 for glucose detection [Figure 6E][106].
In addition to monitoring glucose and lactate levels, significant progress has been achieved in advancing sensors for a range of other metabolites such as uric acid, alcohol, and more, offering a deeper understanding of an individual’s health condition. Hu et al. proposed a remarkable sweat monitoring device that integrates a uric acid monitoring system with a PDMS-based microfluidic system. This flexible and wearable device allows for on-site perspiration collection, analysis, and wireless data transmission. The uric acid sensor demonstrated a detection range of 5-200 μM and a detection limit of 1.79 μM. This novel technology provides a valuable diagnostic tool for routine health monitoring, particularly for patients with conditions such as gout, cardiovascular diseases, and renal diseases [Figure 6F][76]. Kim et al. reported a tattoo-based alcohol monitoring platform that combines sweat-inducing iontophoresis with an amperometric enzymatic biosensing method. This alcohol biosensor obtained a detection range of 0-36 mM and a sensitivity of 0.362 ± 0.009 μA·mM-1, which can provide real-time status of personal alcohol consumption in practice[62]. All these developments contribute to the field of personalized health monitoring using sweat-based metabolite analysis.
Ions and sweat volume detection
Sweat can also provide significant perspectives into an individual’s health condition by reflecting the body’s amount of salt and water metabolism. For instance, dehydration, cramping in the muscles, and hyponatremia can result from excessive sodium and potassium loss. Emaminejad et al. proposed a wearable electrochemical sensor [Figure 7A] as a wristband. It safely extracts sweat using improved iontophoresis, allowing thorough analysis of specific elements such as Na+ and Cl-. The system wirelessly controls sweat production and provides instant on-site measurements. Specialized electrochemical methods and ion-selective membranes enhance electrode stability and selectivity. This advanced system enables easy access to abundant sweat samples for widespread health monitoring[61]. Parrilla et al. reported a wearable potentiometric ion sensor (WPIS) to measure ions in sweat. These sensors track pH, Cl-, K+, and Na+ using a flexible sampling cell. The electronic part is screen-printed on a flexible substrate, and electrodes are enhanced utilizing multi-walled carbon nanotubes (MWCNTs) and a selective membrane. The sampling cell ensures accurate sweat capture without contamination or evaporation issues [Figure 7B][107].
Figure 7. Flexible sweat sensors for ions, drugs, and sweat volume monitoring. (A) Wristband for ions detection in sweat. Reproduced with permission[61]. Copyright 2017, National Academy of Sciences Publishing Group; (B) Flexible device for multiple biomarkers sensing. Reproduced with permission[107]. Copyright 2019, American Chemical Society; (C) Schematic diagram of sweat rate sensor using microfluidic channel, scale bar: 1 cm. Reproduced under the terms and conditions of the CC BY[47]. Copyright 2020, Author(s), published by The American Association for the Advancement of Science; (D) A vertical fluidic-controlled wearable platform for simultaneous sweat rate detection. Reproduced with permission[110]. Copyright 2022, Elsevier; (E) A tape-free, digital wearable band designed for monitoring exercise sweat rate. Reproduced with permission[111]. Copyright 2023, Wiley-VCH; (F) Dual-aptamer-based sensor for drug detection. Reproduced with permission[108]. Copyright 2022, American Chemical Society; (G) Caffeine detection by sweat sensing. Reproduced with permission[18]. Copyright 2018, Wiley-VCH.
As for the sweat volume monitoring, a flexible, adhesive patch with sticker-like properties is attained by combining multiple layers of microfluidics, reservoirs for dyes and bioassays, a top layer featuring color reference stripes, and a skin adhesive layer underneath, as illustrated in Figure 7C. A specified sweat collecting location can yield around 130 μL of sweat for Microchannel 1. Perspiration and an orange dye combine to create a highly visible propagation down the channel, making it possible to quickly analyze and estimate the volume of perspiration. The low bending stiffness and thin shape of the device allow for mechanical deformations, improving wearability during strenuous physical activity[47]. Then, Wang et al. introduced an innovative wearable sensor for calibration-free assessment of regional sweat rate and total electrolyte level. By employing a compact vertical channel, integrated conductance electrodes, and an absorbent layer, the microfluidic-based sweat sensor device achieves controlled sweat behavior and sequential detection. The sweat is collected in small volumes, contacts the electrodes, and evaporates quickly. Real-time recordings generate a square-wave conductance profile, providing information on sweat rate and electrolyte concentration. The sensor can measure sweat rate within the range of 0.5-
Drugs detection
Sweat analysis has also become a vital tool for drug analysis, finding applications in clinical therapies, drug misuse testing, doping control, and digital health monitoring[26,114]. The wearable electrochemical aptasensor [Figure 7F] detects drugs in sweat with good precision and sensitivity. It utilizes an array of single and dual aptamers for accurate identification. The aptamer sensor array can accurately identify 16 analytes with 100% accuracy, and the sensor array can detect six structurally similar drugs and differentiate between different drugs in artificial and human sweat samples to provide accurate results. Besides, analyte gradient concentrations in the range of 0.001 to 5 μM can be accurately and precisely detected by the sensors. Conformational changes induced by binding to the target-bound Fc-labeled aptamer increase current, directly correlating with target concentration. This reagent-free sensor offers rapid drug detection. The Apt1+2-based sensor shows enhanced affinity and cross-reactivity compared to sensors using only Apt1 or Apt2. With secure skin adherence, this flexible sensor enables monitoring of psychoactive drug intake during sweating, combining precise aptamers and electrochemistry for fast and accurate identification[108]. Caffeine, a widely consumed drug found in coffee, tea, and various commercial products, can result in health issues such as coronary syndromes, high blood pressure, and depression when taken excessively. In official athletic competitions, it is considered an ergogenic drug, and its presence in urine is tested before tournaments. The triple-electrode array [Figure 7G] utilizes a carbon electrode modified with carbon nanotubes (CNTs)/Nafion films as the working electrode, along with a carbon counter electrode and an Ag/AgCl reference electrode. Caffeine detection via differential pulse voltammetry (DPV) results in a distinct peak around 1.4 V, providing a quantitative measure of caffeine concentration in sweat. This device effectively monitors sweat caffeine levels, correlating with dosage and revealing physiological patterns associated with caffeine intake[18]. A wearable sweatband is also being proposed as an effective solution for monitoring nicotine levels in sweat, allowing for a quantitative assessment of an individual’s exposure to smoking. The working electrode of the sweatband is constructed using gold nanodendrites and is functionalized with cytochrome P450 2B6 (CYP2B6), an enzyme that can oxidize nicotine. This oxidation process converts sweat nicotine into a nicotine iminium ion, resulting in a measurable current. By analyzing the amperometric responses of the sensor, it becomes possible to quantify nicotine concentrations in sweat. The presented nicotine sensors demonstrate a sensitivity of 4.3 nA·mM-1 and a linear range of 0-30 μM[97]. Carbamazepine (CBZ) is a commonly prescribed neurological therapeutic drug used to treat a range of conditions, including psychomotor seizures, trigeminal neuralgia, clonic seizures, partial seizures, and other related disorders. Veeralingam et al. have developed a cost-effective and flexible amperometric sensing platform for detecting its levels in human sweat. This innovative platform employs NiSe2 nanoclusters as the working electrode. By utilizing their large surface area, these nanoclusters exhibit an impressive sensitivity of 65.65 μA·mM-1, covering a wide concentration range from 50 nM to 10 μM[109]. In conclusion, sweat analysis has become increasingly important for drug detection and monitoring, and the promising results from recent studies emphasize its potential for application in point-of-care medical diagnostics.
SWEAT-BASED ENERGY HARVESTERS
Advancements in flexible electronics enable detailed physiological data collection. Traditional batteries pose challenges with their bulkiness, inflexibility, and hazardous components. Recently, significant progress has been made in powering flexible electronics with innovative methods. One promising approach is utilizing near field communication (NFC) for efficient energy transfer in a sweat sensing system, enabling the wireless power transmission from an external source to the device and eliminating the need for physical connections or bulky batteries[115-117]. Another exciting avenue is leveraging energy from the sweat itself to power flexible electronics. Sweat contains various chemical components, including electrolytes and metabolites, that can be harnessed to generate electrical energy[28,29,41]. What is more, it is a naturally occurring bodily fluid constantly produced by our sweat glands, readily available and easily obtained[118]. Additionally, utilizing sweat as an energy source is biocompatible and environmentally friendly[66,113,119]. By converting the chemical energy present in sweat into electricity, these devices enable self-sustainability and reduce the dependence on traditional power sources. Here, we summarize the recent developments in BFCs, SABs, and SACs, which can be seamlessly integrated with sweat sampling and sensing modules, enhancing functionality while reducing risks associated with conventional batteries.
Sweat-based biofuel cells
Sweat-based BFCs are unique electrochemical devices that utilize biofluids as both electrolytes and fuel sources. They utilize bioelectrocatalytic reactions to generate electricity by harnessing the energy from redox-active metabolites found in sweat. Lactate, abundant in sweat at concentrations of 2-30 mM, is particularly important in energy generation[26]. Typically, these BFCs use LOx as the anode, while the cathode incorporates oxygen reduction catalysts [Figure 8A][120]. The anode and cathode reactions can be respectively expressed as
Figure 8. Sweat-based biofuel cells. (A) Illustration of lactate-based sweat-activated BFC. Reproduced under the terms and conditions of the CC BY[120]. Copyright 2023, Author(s), published by MDPI; (B) Flexible enzymatic fuel cell utilizing 1, 4-naphthoquinone/MWCNT-Modified bio-anode and PVA hydrogel electrolyte. Reproduced with permission[130]. Copyright 2022, Elsevier; (C) Illustration of glucose-based sweat-activated biofuel cells. Reproduced with permission[137]. Copyright 2022, Wiley-VCH; (D) Glucose Biofuel Cell on a Cotton Textile Cloth Platform. Reproduced with permission[138]. Copyright 2019, Elsevier; (E) Illustration and demonstration of ethanol-based sweat-activated biofuel cells. Reproduced with permission[139]. Copyright 2021, Elsevier; (F) Illustration of bacteria metabolism-based sweat-activated biofuel cells. Reproduced with permission[140]. Copyright 2022, American Chemical Society; (G) Self-powered e-skins generate electricity from sweat-eating bacteria. Reproduced with permission[141]. Copyright 2020, Elsevier. BFC: Biofuel cells; MWCNT: multi-walled carbon nanotube; PVA: polyvinyl alcohol.
The enzyme-electrode interface is crucial for sweat-based BFCs. Electronic mediators enhance the ability of LOx to oxidize lactate by aiding electron transfer. Choice of mediators influences anode potential, determining the onset potential of oxidation. 1-methoxy-5-methylphenazinium methyl sulfate (1-methoxy PMS)[121], tetrathiafulvalene (TTF)[120,122-124], naphthoquinone[125-130], and ferrocene derivatives[131-133] are commonly used as the electronic mediators. Yu et al. developed an electronic skin powered by sweat lactate BFCs that utilizes the TTF as the redox mediator, demonstrating an open-circuit potential (OCP) of approximately 0.6 V and achieving the highest power output of around 3.5 mW·cm-2 in 40 mM lactate solutions. The device exhibited exceptional stability, maintaining its performance over a continuous 60-hour operation[124]. Yang et al. constructed a lactate BFC using a 1,4-naphthoquinone/MWCNT-modified bio-anode, which can deliver a power density of 62.2 ± 2.4 μW·cm-2 under bending/torsion conditions
In addition to lactate-based sweat BFCs, glucose and ethanol are two promising metabolites found in sweat that can be utilized as fuel sources. The working mechanisms are given in the following equations.
As for glucose, the anode and cathode reactions are respectively denoted as [Figure 8C][137]
Yin et al. developed a cotton textile-based BFC using bioanode and biocathode fibers for glucose oxidation and oxygen reduction. The cell achieved power densities of 48 μW·cm-2 at 0.24 V and 216 μW·cm-2 at 0.36 V with varying glucose concentrations. The flexible design maintained performance even when deformed, and a series connection of four cells illuminated an light-emitting diode (LED) at 1.9 V [Figure 8D][138].
As for ethanol, the reactions are written as [Figure 8E][139]
Sun et al. created a flexible BFC that captured energy from individuals after alcohol consumption, using ethanol as a biofuel. The BFC incorporated 3D coralloid nitrogen-doped hierarchical micromesoporous carbons aerogels (3D-NHCAs), alcohol oxidase (AOx), and terephthalaldehyde (TPA) on one screen-printed electrode (SPE) anode, and 3D-NHCAs, BOD, and TPA on another SPE electrode as biocathode. The extensive surface area of the electrode enhanced electrocatalytic performance, resulting in an output of 1.01 μW·cm-2 during exercise [Figure 8E][139]. These advancements expand the range of biofuels derived from human sweat.
Microbial fuel cells (MFC) have recently become a promising method for harnessing energy from human sweat. This innovative approach involves utilizing bacteria as biocatalysts to effectively convert the chemical energy present in sweat into electrical power through bacterial metabolism [Figure 8F][140]. Mohammadifar et al. developed a flexible MFC that generates electricity from sweat using selected bacteria. The MFC can utilize either ammonia-oxidizing or common skin bacteria, offering long-term stability and self-sustaining features. The MFCs contain microorganisms with inherent abilities for self-assembly, self-repair, and self-maintenance. When triggered by human perspiration, the MFC achieved the highest power density of 41.74 ± 5.35 μW·cm-2 with freeze-dried S. epidermidis [Figure 8G][141]. The utilization of microbial energy for wearable electronics remains relatively unexplored, primarily due to concerns regarding the potential toxicity associated with microbial cells. The biocompatibility of these approaches requires further validation. Non-enzymatic fuel cells have also emerged as a promising alternative, offering potential for long-term operation in sweat-based platforms[142,143]. Table 4 summarizes the recent developments of BFCs[106,120,124,127,129,131,137-139,144]. All these developments underscore their potential in energy generation, with advantages including their renewable fuel sources, miniaturization potential, flexibility, and potential for integration into compact devices, enabling them to provide sufficient, sustainable, and biocompatible power for wearable electronics.
The summarization of sweat-based BFCs and their performance
| Electrode | Fuel | OCP (V) | Power density | Ref. | |
| Anode | Cathode | ||||
| FcMe2-LPEI/LOx/TP-PTFE | AnMWCNT/BOx/TP-PTFE | Lactate | 0.55 | 20 μW·cm-2 | [131] |
| LOx/TTF/GNRs/GCE | BOD/ABTS/GNRs/GCE | Lactate | 0.62 | 70.7 µW·cm-2 | [120] |
| Chitosan/LOx/CNT-NQ/Au | Ag2O/CNTs/Au | Lactate | 0.5 | 1.2 mW·cm-2 | [129] |
| LOx/1,4-NQ/MWCNT/Buckpaper | BOx/PPIX/MWCNT/Buckpaper | Lactate | 0.74 | 1.2 μW·cm-2 | [127] |
| LOx/TTF-MDB-CNTs/rGO/h-Ni | Pt alloy-decorated MDB-CNT | Lactate | 0.6 | 3.5 mW·cm-2 | [124] |
| LOx/graphene/Au | Lac/graphene/Au | Lactate | 0.337 | 39.5 μW·cm-2 | [106] |
| GOx/graphene/Au | Lac/graphene/Au | Glucose | 0.195 | 2.16 μW·cm-2 | [106] |
| PB/carbon cloth | GOx/carbon cloth | Glucose | 0.298 | 16.7 μW·cm-2 | [144] |
| GOx-TTF | BOx-ABTS | Glucose | 0.62 | 656 μW·cm-2 | [137] |
| GDH/A-CNT/PolyMG/A-CNT/fibers | BOD/A-CNT/PTFE-CNT/fiber | Glucose | 0.55 | 48 μW·cm-2 | [138] |
| AOx/TPA/3D-NHCAs/SPE | Box/TPA/3D-NHCAs/spe | Alcohol | 0.55 | 1.01 μW·cm-2 | [139] |
Sweat-activated battery
Batteries are essential for providing continuous power to flexible electronic devices owing to their high energy density, low self-discharge, and constant voltage output. Nevertheless, conventional batteries pose safety risks in wearable electronics due to the presence of toxic components (such as lead, cobalt, nickel, and so on) and flammable electrolytes. Rigid format is also a big hurdle when utilizing in flexible electronics. Therefore, plenty of power sources such as SABs, piezoelectric nanogenerators, TENGs, and flexible lithium batteries have been extensively explored to power the flexible electronics. Among these methods, SABs are a promising power source for wearable electronics due to their flexibility, biocompatibility, ease of use, and other merits.
Ortega et al. proposed a self-powered intelligent patch comprising a paper battery that is triggered by the absorption of sweat; the anode is magnesium, while the cathode is silver chloride [Figure 9A]. The reactions are given as
Figure 9. Sweat-activated batteries. (A) Self-powered smart patch for sweat conductivity monitoring. Reproduced under the terms and conditions of the CC BY[145]. Copyright 2019, Author(s), published by Springer Nature; (B) Yarn-shaped batteries activated by an ultralow volume of sweat for self-powered sensing textiles. Reproduced with permission[146]. Copyright 2023, Elsevier; (C) Stretchable sweat-activated battery applied in skin electronics. Reproduced with permission[147]. Copyright 2022, The Authors. Advanced Science published by Wiley‐VCH GmbH; (D) Bandage-based energy generators activated by sweat. Reproduced with permission[148]. Copyright 2022, Elsevier; (E) Sweat-activated batteries embedded within garment. Reproduced under the terms and conditions of the CC BY[69]. Copyright 2022, Author(s), published by Springer Nature; (F) Bio-inspired ultra-thin microfluidics for soft sweat-activated batteries. Scale bar: 5 mm. Reproduced with permission[149]. Copyright 2022, Royal Society of Chemistry.
Here, the device not only acts as the SAB but also as a sensor, as the battery output is entirely contingent on conductivity and components of sweat, which can reflect the wearer’s health status. This approach allows for the consolidation of the battery and sensor into a single unit[145].
Ju et al. presented a sweat-activated yarn battery (SAYB) with a unique core-sheath structure. The SAYB used zinc (Zn) as the anode and carbon as the cathode. It could be triggered in just three seconds by a small amount of NaCl solution (1 μL, 100 mM); this swift activation was facilitated by the thin and hydrophilic cotton sheath of the SAYB. The battery achieved a high power density (0.72 mW·cm-2) and energy capacity (15.3 mAh). It also demonstrated excellent durability, enduring 10,000 bending, 2,800 twisting, and 20 washing cycles without a discernible power reduction. This SAYB holds great potential for wearable healthcare and sports monitoring in smart garments [Figure 9B][146]. Liu et al. presented a soft, skin-integrated, and stretchable SAB that operates based on a straightforward single displacement reaction. In this system, when the KCl power-embedded cotton absorbs the sweat, zinc undergoes oxidation to form Zn2+ ions, while copper ions (Cu2+) are simultaneously reduced to copper (Cu). The whole system achieves a capacity of 42.5 mAh and a power density of 7.46 mW·cm-2, which can illuminate 120 LEDs continuously for more than 5 h. Additionally, it can power Bluetooth wireless technology, enabling the real-time recording of physiological signals for a duration exceeding 6 h [Figure 9C][147]. To further enhance the user-friendliness of SABs in wearable electronics, a SAB-based bandage is developed with a power density of
The summarization of sweat-based SABs and their performance
| Electrode | OCP (V) | Power density | Ref. | |
| Anode | Cathode | |||
| Mg | LIGA@MnO2 | 1.5 | 6.31 mW·cm-2 | [150] |
| Mg | Ag2O | 1.8 | 122 mW·cm-2 | [149] |
| Mg | Ni/graphene foam | 1.41 | 16.3 mW·cm-2 | [148] |
| Mg | Graphene | 1.54 | 3.17 mW·cm-2 | [69] |
| Zn foil-wrapped yarn | Carbon-black-modified yarn | 1 | 33.1 μW·cm-2 | [151] |
| Zn-wire | Carbon | 1 | 1.72 mW·cm-2 | [146] |
| Zn | Ag2O | ~1 | 3.47 mW·cm-2 | [152] |
| Zn | CuSO4 | 0.93 | 7.46 mW·cm-2 | [147] |
Sweat-activated supercapacitor
Supercapacitors offer advantages over batteries, such as high power density, fast charge-discharge rates, and long cycling life. Traditional supercapacitors use toxic electrolytes, requiring special packaging for safety. In contrast, SASs utilize biocompatible biological fluids such as sweat as electrolytes. This section explores the emerging field of SASs and their potential for energy storage. Luo et al. devised an on-skin supercapacitor integrated into garments that harvests energy from sweat during sports[153]. It utilizes a NaCl electrolyte and a polyaniline (PANI)/CNT electrode, offering an extended potential window of 0.8 to 1.4 V, with the energy density at 112.1 mF·cm-2 (3.0 M NaCl) and 110.5 mF·cm-2 (1.0 M NaCl). A sweat-charging watchband integrates four supercapacitors for effective charging up to 3.2 V [Figure 10A]. Manjakkal et al. introduced a flexible supercapacitor based on sweat for applications in wearables and smart textiles. Sweat serves as the electrolyte, and the active electrode is polypyrrole/poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS). Because of the redox reactions of PEDOT:PSS and electrochemical double-layer capacitance, the supercapacitor covered with PEDOT:PSS on cellulose/polyester cloth exhibits high capacitance. It attains a weight-specific capacitance of 8.94 F·g-1 and area-specific capacitance of
Figure 10. Sweat-activated supercapacitors. (A) Sweat-chargeable on-skin supercapacitors. Reproduced with permission[153]. Copyright 2021, Elsevier; (B) Fabric-Based Wearable Supercapacitor Utilizing PEDOT:PSS-Coated Cloth and Sweat as Electrolyte. Reproduced under the terms and conditions of the CC BY[154]. Copyright 2020, Author(s), published by WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim; (C) Weavable yarn-shaped supercapacitor for wireless sweat biosensing. Reproduced with permission[37]. Copyright 2023, Elsevier. PEDOT:PSS: Polypyrrole/poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate).
The power requirements of a complete sweat-based platform typically fall within the range of nanowatts (nW) to milliwatts (mW). The existing sweat-based energy generators, such as BFCs and SABs, can generate maximum voltages of 1.8 V and 122 mW·cm-2, respectively. This voltage and power output are adequate to power certain sensors and related devices for a few minutes. Here, we summarize the recent advancements in sweat-based BFCs and SABs and the typical power requirements for wearable devices [Figure 11A and B]. Additionally, Figure 11C demonstrates the significant power density consumption of bioelectronics systems, thereby confirming the viability and effectiveness of sweat-based energy harvesters[155]. However, multifunctional sensing capabilities and additional components such as iontophoresis electrodes and wireless transmission modules may require higher energy levels to operate effectively. Furthermore, the performance of the BFCs, SABs, and SASs can indeed vary due to differences in sweat composition and pH values under physiological status and locations of sweat sampling of different individuals, which have also been previously studied[69,149,150]. Recently, in order to improve the power performance and stability of sweat-based energy harvesters during operation, a series of research and developments have been proposed, for example, integrating the BFC with energy management components, integrating BFC with biomechanical energy harvesting systems, and so on[156-158].
Figure 11. Typical power requirements for wearable devices. (A) Development of OCP and power density in BFCs and SABs; (B) Power consumption and voltage requirements of electronic modules in flexible electronics; (C) Power density considerations for viability of bioelectronics systems. Reproduced with permission[155]. Copyright 2021, Wiley-VCH. OCP: Open-circuit potential; BFCs: biofuel cells; SABs: sweat-activated batteries.
SWEAT-BASED PLATFORM DATA DISPLAY METHODS
Wearable technology has sparked interest in personal health monitoring, particularly sweat sensors that provide insights into physiological state. These sensors measure electrolyte levels, metabolites, and hydration in sweat. However, effectively conveying this data to users has been challenging. To address this, researchers explore innovative data display methods for sweat sensors, especially in mobile phone displays. These displays offer a convenient and accessible platform for users to interact with sweat-related data. Incorporating elements, such as color, LEDs, actuators, and sound, enhances the user experience and provides valuable health insights. These advancements have the potential to revolutionize how we monitor and understand our well-being.
Huang et al. developed a SAB embedded in wearable electronics, enabling real-time sweat monitoring. The sensor patch converts signals to digital format using 12-bit analog-to-digital converters (ADCs) and stores them in a two-megabit electrically erasable programmable read-only memory (EEPROM). When the phone is nearby, the NFC chip triggers the microcontroller (MCU) to read the data from the EEPROM via I2C and transfers it to the phone for display and storage in the app [Figure 12A][69]. Bandodkar et al. presented a native, battery-free electronic sensing system that draws inspiration from BFCs. This system combines chronometric microfluidic platforms with embedded colorimetric assays. By leveraging NFC technology in smartphones, wireless data extraction is achieved, and the smartphone camera captures digital images for colorimetric analysis. This enables visual interpretation and quantification of sweat rate/loss, pH, and chloride [Figure 12B][60]. Additionally, LEDs prove effective in real-time visualization of health status. Zhao et al. have created a system called the Health Status Sensing and Visualization System (HSSVS) that leverages color changes in LEDs to easily identify fluctuations in health status [Figure 12C][150]. In addition to visual displays of health fluctuations, touch serves as a significant reminder of our health status, offering distinct and valuable insights into our bodies and well-being. Recently, Huang et al. presented a sweat monitoring system that analyzes multiple components in fresh sweat (NH4+, pH, Na+, skin impedance, glucose, and surface temperature) during exercise. Furthermore, the researchers introduced a groundbreaking safety warning mechanism as an integral system part. This mechanism utilizes a compact actuator to deliver mechanical stimuli, working in conjunction with six distinct color LEDs. Each LED corresponds to one of the six biosensors, ensuring users receive simultaneous safety alerts [Figure 12D][159].
Figure 12. Sweat-based platform data display methods. (A) Mobile phone display for sweat sensor data. Reproduced under the terms and conditions of the CC BY[69]. Copyright 2022, Author(s), published by Springer Nature; (B) Colorimetric assays in chronometric microfluidic platforms for sweat sensing. Reproduced under the terms and conditions of the CC BY-NC[60]. Copyright 2022, Author(s), published by The American Association for the Advancement of Science; (C) LED-based health status sensing and visualization system. Reproduced under the terms and conditions of the CC BY[150]. Copyright 2023, Author(s), published by Wiley‐VCH GmbH; (D) Skin-integrated sweat monitor with mechanical stimulus and LED safety warning. Reproduced with permission[159]. Copyright 2021, Wiley-VCH. LED: Light-emitting diode.
CONCLUSION AND OUTLOOK
In the preceding sections, we have discussed various sweat sampling methods, sweat sensors, sweat-based energy harvesters, and sweat data display methods. Although numerous studies have been conducted at the device level (including sensors, powering systems, and electronic components), ensuring an adequate sweat supply, highly sensitive sensors with low energy consumption still pose significant challenges.
From the sweat sampling methods, enabling sweat secretion in sedentary environments is crucial for expanding their applications beyond sports-related scenarios. However, iontophoresis, while showing promise for one-time measurements, may cause skin irritation or discomfort, making it less suitable for individuals with sensitive skin or conditions such as dermatitis. More new techniques need to be explored for sweat sampling. For example, to enhance the sweat extract ability, further in-depth research on the human sweating mechanism is necessary, along with developing corresponding database models specific to different populations. This will enable efficient and personalized sweat collection. Additionally, enhancing the collection capabilities of microfluidics, improving anti-interference abilities, and reducing water evaporation are vital in ensuring thorough and adequate sweat collection.
From the perspective of wearable sweat sensors, significant progress has been made in correlating physiological biomarkers with diseases. However, additional investigation is required to merge multiple sensing modalities into a singular device capable of simultaneously detecting multiple analytes. As for these sensors, it is crucial to evaluate wearable sensors by detecting a wide range of populations, including various moods, age groups, genders, geographical locations, and so on. This can offer a more holistic view of an individual’s physiological condition. Additionally, current electrochemical biosensors relying on enzymes require more investigations into stability and environmental tolerance. The introduction of non-enzymatic sensors could directly detect target analytes in sweat using nanomaterials, eliminating the need for enzymes, which offer advantages including improved stability, longer shelf life, and reduced cost. Optical sweat sensors are an emerging field of research in sweat sensor technology. These sensors utilize light-based techniques, such as fluorescence or absorbance spectroscopy, to detect and analyze biomarkers in sweat. They offer advantages such as noninvasiveness, real-time monitoring, and high sensitivity. Ongoing research aims to improve the performance of optical sweat sensors by exploring advanced photonic materials, miniaturized sensor designs, and signal processing algorithms.
To enhance the suitability of sweat-based bioelectronic systems for energy storage, it is crucial to carefully consider the stability of electrodes due to the complex composition of sweat, which can lead to corrosion and fouling. We should optimize the electrolyte composition and concentration to facilitate efficient ion transport while minimizing interference from sweat components. Investigating water retention within the systems is essential for the long-term functionality of sweat energy storage devices. Additionally, an efficient energy management system can maximize power utilization and stability.
From the data display perspective, real-time monitoring and transmission of human sweat marker fluctuations enable the visualization and early warning of health status through visual and tactile data display methods. Advances in artificial intelligence algorithms facilitate health modeling and evaluation based on existing data, enhancing our understanding of health conditions.
The application field of the practical device also determines the degree of emphasis on different challenges in sweat electronics. For instance, in certain applications of sweat biomarkers monitoring, the device may prioritize the sweat sampling and sensing performance, while the sweat-based energy harvester may have more requirements in terms of electropower performance and biocompatibility. The data display has more potential for health visualization and early warning of human status. All in all, the challenges and opportunities in healthcare drive the advancement of flexible sweat sensors. Personalized data from these wearables is crucial for precise medical practices, encouraging active engagement in health management. Integrating consumer wearables with medical devices creates a connected network, providing comprehensive insights for researchers and clinicians. The seamless incorporation of sweat sensors into everyday routines augments the precision of personalized medicine.
DECLARATIONS
Authors’ contributions
Initiated the reviewing idea and outlined the manuscript structure: Zhao G, Liu Y, Yu X
Conducted the literature review and wrote the manuscript: Zhao G, Li Z
Involved in the discussion and revised the manuscript: Huang X, Zhang Q
Supervision, review and editing, project administration: Yu X
Availability of data and materials
Not applicable.
Financial support and sponsorship
This work was supported by the National Natural Science Foundation of China (Grant No. 62122002), City University of Hong Kong (Grant Nos. 9667221, 9678274, and 9610444), InnoHK Project on Project 2.2 - AI-based 3D ultrasound imaging algorithm at Hong Kong Centre for Cerebro-Cardiovascular Health Engineering (COCHE), the Research Grants Council of the Hong Kong Special Administrative Region (Grant No. RFS2324-1S03), and Shenzhen Science and Technology Innovation Commission (Grant No. SGDX20220530111401011).
Conflicts of interest
Yu X is an Editorial Board Member of the journal Soft Science, while the other authors have declared that they have no conflicts of interest.
Ethical approval and consent to participate
Figures 3A, 3C, 3D, 4A, 4E, 5B, 5D, 6B, 6F, 7A, 7C, 7E, 7F, 8E, 9E, 9F, 12A and 12B are cited from the researches in refs[16,47,49,52,54,55,60-62,69,76,104,108,111,139,149] respectively. The citations include images that depict specific body parts of the participants in the experiment, aiming to present the research results and experimental methods in a more intuitive manner. Strict measures have been taken during the production of these illustrations to ensure the privacy of the participants is safeguarded. The original images have undergone rigorous review to uphold privacy standards.
Consent for publication
Not applicable.
Copyright
© The Author(s) 2024.
REFERENCES
1. Kaya T, Liu G, Ho J, et al. Wearable sweat sensors: background and current trends. Electroanalysis 2019;31:411-21.
2. Ye C, Wang M, Min J, et al. A wearable aptamer nanobiosensor for non-invasive female hormone monitoring. Nat Nanotechnol 2024;19:330-7.
3. Song Y, Tay RY, Li J, et al. 3D-printed epifluidic electronic skin for machine learning - powered multimodal health surveillance. Sci Adv 2023;9:eadi6492.
4. Mukasa D, Wang M, Min J, et al. A computationally assisted approach for designing wearable biosensors toward non-invasive personalized molecular analysis. Adv Mater 2023;35:2212161.
5. Torrente-Rodríguez RM, Tu J, Yang Y, et al. Investigation of cortisol dynamics in human sweat using a graphene-based wireless mHealth system. Matter 2020;2:921-37.
6. Yang Y, Song Y, Bo X, et al. A laser-engraved wearable sensor for sensitive detection of uric acid and tyrosine in sweat. Nat Biotechnol 2020;38:217-24.
7. Lorestani F, Zhang X, Abdullah AM, et al. A highly sensitive and long-term stable wearable patch for continuous analysis of biomarkers in sweat. Adv Funct Mater 2023;33:2306117.
8. Liu S, Yang DS, Wang S, et al. Soft, environmentally degradable microfluidic devices for measurement of sweat rate and total sweat loss and for colorimetric analysis of sweat biomarkers. EcoMat 2023;5:e12270.
9. Tu J, Min J, Song Y, et al. A wireless patch for the monitoring of C-reactive protein in sweat. Nat Biomed Eng 2023;7:1293-306.
10. Gao F, Liu C, Zhang L, et al. Wearable and flexible electrochemical sensors for sweat analysis: a review. Microsyst Nanoeng 2023;9:1.
11. Ji W, Zhu J, Wu W, et al. Wearable sweat biosensors refresh personalized health/medical diagnostics. Research 2021;2021:9757126.
12. Choi J, Ghaffari R, Baker LB, Rogers JA. Skin-interfaced systems for sweat collection and analytics. Sci Adv 2018;4:eaar3921.
13. Sempionatto JR, Lasalde-Ramírez JA, Mahato K, Wang J, Gao W. Wearable chemical sensors for biomarker discovery in the omics era. Nat Rev Chem 2022;6:899-915.
14. Xu L, Zhou Z, Fan M, Fang X. Advances in wearable flexible electrochemical sensors for sweat monitoring: a mini-review. Int J Electrochem Sci 2023;18:13-9.
15. Tabasum H, Gill N, Mishra R, Lone S. Wearable microfluidic-based e-skin sweat sensors. RSC Adv 2022;12:8691-707.
16. Nyein HYY, Bariya M, Tran B, et al. A wearable patch for continuous analysis of thermoregulatory sweat at rest. Nat Commun 2021;12:1823.
17. Tai LC, Liaw TS, Lin Y, et al. Wearable sweat band for noninvasive levodopa monitoring. Nano Lett 2019;19:6346-51.
18. Tai LC, Gao W, Chao M, et al. Methylxanthine drug monitoring with wearable sweat sensors. Adv Mater 2018;30:1707442.
19. Friedel M, Thompson IAP, Kasting G, et al. Opportunities and challenges in the diagnostic utility of dermal interstitial fluid. Nat Biomed Eng 2023;7:1541-55.
20. Jadoon S, Karim S, Akram MR, et al. Recent developments in sweat analysis and its applications. Int J Anal Chem 2015;2015:164974.
21. Teymourian H, Barfidokht A, Wang J. Electrochemical glucose sensors in diabetes management: an updated review (2010-2020). Chem Soc Rev 2020;49:7671-709.
22. Villiger M, Stoop R, Vetsch T, et al. Evaluation and review of body fluids saliva, sweat and tear compared to biochemical hydration assessment markers within blood and urine. Eur J Clin Nutr 2018;72:69-76.
23. Heikenfeld J, Jajack A, Feldman B, et al. Accessing analytes in biofluids for peripheral biochemical monitoring. Nat Biotechnol 2019;37:407-19.
24. Aslan R, Aydoğdu M, Bostancı Hİ, Ertaş H, Akgür SA. Development of analytical method for illegal substances in sweat and comparison of the effectiveness of sweat collection materials. Leg Med 2023;64:102264.
25. Nyein HY, Gao W, Shahpar Z, et al. A wearable electrochemical platform for noninvasive simultaneous monitoring of Ca2+ and pH. ACS Nano 2016;10:7216-24.
27. Min J, Tu J, Xu C, et al. Skin-interfaced wearable sweat sensors for precision medicine. Chem Rev 2023;123:5049-138.
28. Ghaffari R, Rogers JA, Ray TR. Recent progress, challenges, and opportunities for wearable biochemical sensors for sweat analysis. Sens Actuators B Chem 2021;332:129447.
29. Zhou J, Men D, Zhang X. Progress in wearable sweat sensors and their applications. Chinese J Anal Chem 2022;50:87-96.
30. Zhang S, Tan R, Xu X, Iqbal S, Hu J. Fibers/textiles-based flexible sweat sensors: a review. ACS Mater Lett 2023;5:1420-40.
31. Luo Y, Abidian MR, Ahn JH, et al. Technology roadmap for flexible sensors. ACS Nano 2023;17:5211-95.
32. Shen H, Xue L, Ma Y, Huang H, Chen L. Recent advances toward wearable sweat monitoring systems. Adv Mater Technol 2023;8:2200513.
33. Manjakkal L, Dervin S, Dahiya R. Correction: Flexible potentiometric pH sensors for wearable systems. RSC Adv 2020;10:12734.
34. Kim J, Oh S, Yang DS, et al. A skin-interfaced, miniaturized platform for triggered induction, capture and colorimetric multicomponent analysis of microliter volumes of sweat. Biosens Bioelectron 2024;253:116166.
35. Manjakkal L, Yin L, Nathan A, Wang J, Dahiya R. Energy autonomous sweat-based wearable systems. Adv Mater 2021;33:2100899.
36. Yin L, Sandhu SS, Liu R, et al. Wearable e-skin microgrid with battery-based, self-regulated bioenergy module for epidermal sweat sensing. Adv Energy Mater 2023;13:2203418.
37. Xiao G, Ju J, Li M, et al. Weavable yarn-shaped supercapacitor in sweat-activated self-charging power textile for wireless sweat biosensing. Biosens Bioelectron 2023;235:115389.
38. Moonen EJ, Haakma JR, Peri E, Pelssers E, Mischi M, den Toonder JM. Wearable sweat sensing for prolonged, semicontinuous, and nonobtrusive health monitoring. VIEW 2020;1:20200077.
39. Xing Z, Hui J, Lin B, Wu Z, Mao H. Recent advances in wearable sensors for the monitoring of sweat: a comprehensive tendency summary. Chemosensors 2023;11:470.
40. Clark KM, Ray TR. Recent advances in skin-interfaced wearable sweat sensors: opportunities for equitable personalized medicine and global health diagnostics. ACS Sens 2023;8:3606-22.
41. Qiao Y, Qiao L, Chen Z, Liu B, Gao L, Zhang L. Wearable sensor for continuous sweat biomarker monitoring. Chemosensors 2022;10:273.
42. Mohan A, Rajendran V, Mishra RK, Jayaraman M. Recent advances and perspectives in sweat based wearable electrochemical sensors. TrAC Trends Anal Chem 2020;131:116024.
43. Liu C, Xu T, Wang D, Zhang X. The role of sampling in wearable sweat sensors. Talanta 2020;212:120801.
44. Shirreffs SM, Maughan RJ. Whole body sweat collection in humans: an improved method with preliminary data on electrolyte content. J Appl Physiol 1997;82:336-41.
45. Ono E, Murota H, Mori Y, et al. Sweat glucose and GLUT2 expression in atopic dermatitis: implication for clinical manifestation and treatment. PLoS One 2018;13:e0195960.
46. Baker LB, Ungaro CT, Barnes KA, Nuccio RP, Reimel AJ, Stofan JR. Validity and reliability of a field technique for sweat Na+ and K+ analysis during exercise in a hot-humid environment. Physiol Rep 2014;2:e12007.
47. Baker LB, Model JB, Barnes KA, et al. Skin-interfaced microfluidic system with personalized sweating rate and sweat chloride analytics for sports science applications. Sci Adv 2020;6:eabe3929.
48. Brueck A, Iftekhar T, Stannard AB, Yelamarthi K, Kaya T. A real-time wireless sweat rate measurement system for physical activity monitoring. Sensors 2018;18:533.
49. Huang X, Liu Y, Chen K, et al. Stretchable, wireless sensors and functional substrates for epidermal characterization of sweat. Small 2014;10:3083-90.
50. Dai B, Li K, Shi L, et al. Bioinspired Janus textile with conical micropores for human body moisture and thermal management. Adv Mater 2019;31:1904113.
51. Zhong B, Jiang K, Wang L, Shen G. Wearable sweat loss measuring devices: from the role of sweat loss to advanced mechanisms and designs. Adv Sci 2022;9:e2103257.
52. Jain V, Ochoa M, Jiang H, Rahimi R, Ziaie B. A mass-customizable dermal patch with discrete colorimetric indicators for personalized sweat rate quantification. Microsyst Nanoeng 2019;5:29.
53. Kabiri K, Zohuriaan-Mehr MJ. Porous superabsorbent hydrogel composites: synthesis, morphology and swelling rate. Macro Mater Eng 2004;289:653-61.
54. Sempionatto JR, Moon JM, Wang J. Touch-based fingertip blood-free reliable glucose monitoring: personalized data processing for predicting blood glucose concentrations. ACS Sens 2021;6:1875-83.
55. Wang S, Wu Y, Gu Y, et al. Wearable sweatband sensor platform based on gold nanodendrite array as efficient solid contact of ion-selective electrode. Anal Chem 2017;89:10224-31.
56. Wu CH, Ma HJH, Baessler P, Balanay RK, Ray TR. Skin-interfaced microfluidic systems with spatially engineered 3D fluidics for sweat capture and analysis. Sci Adv 2023;9:eadg4272.
57. Zhang Y, Chen Y, Huang J, et al. Skin-interfaced microfluidic devices with one-opening chambers and hydrophobic valves for sweat collection and analysis. Lab Chip 2020;20:2635-45.
58. Son J, Bae GY, Lee S, et al. Cactus-spine-inspired sweat-collecting patch for fast and continuous monitoring of sweat. Adv Mater 2021;33:2102740.
59. Song Y, Min J, Yu Y, et al. Wireless battery-free wearable sweat sensor powered by human motion. Sci Adv 2020;6:eaay9842.
60. Bandodkar AJ, Gutruf P, Choi J, et al. Battery-free, skin-interfaced microfluidic/electronic systems for simultaneous electrochemical, colorimetric, and volumetric analysis of sweat. Sci Adv 2019;5:eaav3294.
61. Emaminejad S, Gao W, Wu E, et al. Autonomous sweat extraction and analysis applied to cystic fibrosis and glucose monitoring using a fully integrated wearable platform. Proc Natl Acad Sci U S A 2017;114:4625-30.
62. Kim J, Jeerapan I, Imani S, et al. Noninvasive alcohol monitoring using a wearable tattoo-based iontophoretic-biosensing system. ACS Sens 2016;1:1011-9.
63. Xu G, Huang X, Shi R, et al. Triboelectric nanogenerator enabled sweat extraction and power activation for sweat monitoring. Adv Funct Mater 2024;34:2310777.
64. Hammond KB, Turcios NL, Gibson LE. Clinical evaluation of the macroduct sweat collection system and conductivity analyzer in the diagnosis of cystic fibrosis. J Pediatr 1994;124:255-60.
65. Yeung KK, Huang T, Hua Y, Zhang K, Yuen MMF, Gao Z. Recent advances in electrochemical sensors for wearable sweat monitoring: a review. IEEE Sensors J 2021;21:14522-39.
66. Yin J, Li J, Reddy VS, Ji D, Ramakrishna S, Xu L. Flexible textile-based sweat sensors for wearable applications. Biosensors 2023;13:127.
67. Naik AR, Zhou Y, Dey AA, et al. Printed microfluidic sweat sensing platform for cortisol and glucose detection. Lab Chip 2021;22:156-69.
68. Patterson MJ, Galloway SD, Nimmo MA. Variations in regional sweat composition in normal human males. Exp Physiol 2000;85:869-75.
69. Huang X, Liu Y, Zhou J, et al. Garment embedded sweat-activated batteries in wearable electronics for continuous sweat monitoring. npj Flex Electron 2022;6:10.
70. Baker LB, Barnes KA, Anderson ML, Passe DH, Stofan JR. Normative data for regional sweat sodium concentration and whole-body sweating rate in athletes. J Sports Sci 2016;34:358-68.
71. Krabak BJ, Lipman GS, Waite BL, Rundell SD. Exercise-associated hyponatremia, hypernatremia, and hydration status in multistage ultramarathons. Wilderness Environ Med 2017;28:291-8.
72. Kim T, Yi Q, Hoang E, Esfandyarpour R. A 3D printed wearable bioelectronic patch for multi-sensing and in situ sweat electrolyte monitoring. Adv Mater Technol 2021;6:2001021.
73. Takahashi A, Maeda K, Sasaki K, et al. Relationships of hyperchloremia with hypertension and proteinuria in patients with chronic kidney disease. Clin Exp Nephrol 2022;26:880-5.
74. Montes-García V, de Oliveira RF, Wang Y, et al. Harnessing selectivity and sensitivity in ion sensing via supramolecular recognition: a 3D hybrid gold nanoparticle network chemiresistor. Adv Funct Mater 2021;31:2008554.
75. Guinovart T, Bandodkar AJ, Windmiller JR, Andrade FJ, Wang J. A potentiometric tattoo sensor for monitoring ammonium in sweat. Analyst 2013;138:7031-8.
76. Hu Y, Wang L, Li J, et al. Thin, soft, skin-integrated electronics for real-time and wireless detection of uric acid in sweat. Int J Smart Nano Mater 2023;14:406-19.
77. Gao W, Nyein HYY, Shahpar Z, et al. Wearable microsensor array for multiplexed heavy metal monitoring of body fluids. ACS Sens 2016;1:866-74.
78. Kim J, de Araujo WR, Samek IA, et al. Wearable temporary tattoo sensor for real-time trace metal monitoring in human sweat. Electrochem Commun 2015;51:41-5.
79. Gao W, Emaminejad S, Nyein HYY, et al. Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis. Nature 2016;529:509-14.
80. Abrar MA, Dong Y, Lee PK, Kim WS. Bendable electro-chemical lactate sensor printed with silver nano-particles. Sci Rep 2016;6:30565.
81. Imani S, Bandodkar AJ, Mohan AMV, et al. A wearable chemical-electrophysiological hybrid biosensing system for real-time health and fitness monitoring. Nat Commun 2016;7:11650.
82. Harvey CJ, LeBouf RF, Stefaniak AB. Formulation and stability of a novel artificial human sweat under conditions of storage and use. Toxicol In Vitro 2010;24:1790-6.
83. Liu YL, Liu R, Qin Y, et al. Flexible electrochemical urea sensor based on surface molecularly imprinted nanotubes for detection of human sweat. Anal Chem 2018;90:13081-7.
84. Dang W, Manjakkal L, Navaraj WT, Lorenzelli L, Vinciguerra V, Dahiya R. Stretchable wireless system for sweat pH monitoring. Biosens Bioelectron 2018;107:192-202.
85. Sempionatto JR, Khorshed AA, Ahmed A, et al. Epidermal enzymatic biosensors for sweat vitamin C: toward personalized nutrition. ACS Sens 2020;5:1804-13.
86. Xu Z, Liu Y, Lv M, Qiao X, Fan GC, Luo X. An anti-fouling wearable molecular imprinting sensor based on semi-interpenetrating network hydrogel for the detection of tryptophan in sweat. Anal Chim Acta 2023;1283:341948.
87. Sideris GA, Tsaramanidis S, Vyllioti AT, Njuguna N. The role of branched-chain amino acid supplementation in combination with locoregional treatments for hepatocellular carcinoma: systematic review and meta-analysis. Cancers 2023;15:926.
88. Holeček M. Branched-chain amino acids in health and disease: metabolism, alterations in blood plasma, and as supplements. Nutr Metab 2018;15:33.
89. Tang W, Yin L, Sempionatto JR, Moon JM, Teymourian H, Wang J. Touch-based stressless cortisol sensing. Adv Mater 2021;33:2008465.
90. Kamat V, Yapell D, Acosta Y, Tezsezen E, Mujawar MA, Bhansali S. Molecular imprinted polymer-based FET sensor for sensing of sweat testosterone to monitor athletic performance. Meet Abstr 2022;MA2022-02:2291.
91. Churcher NK, Upasham S, Rice P, Bhadsavle S, Prasad S. Development of a flexible, sweat-based neuropeptide Y detection platform. RSC Adv 2020;10:23173-86.
92. Sonner Z, Wilder E, Heikenfeld J, et al. The microfluidics of the eccrine sweat gland, including biomarker partitioning, transport, and biosensing implications. Biomicrofluidics 2015;9:031301.
93. Munje RD, Muthukumar S, Jagannath B, Prasad S. A new paradigm in sweat based wearable diagnostics biosensors using room temperature ionic liquids (RTILs). Sci Rep 2017;7:1950.
94. Marques-Deak A, Cizza G, Eskandari F, et al; Premenopausal, Osteoporosis Women, Alendronate, Depression Study Group. Measurement of cytokines in sweat patches and plasma in healthy women: validation in a controlled study. J Immunol Methods 2006;315:99-109.
95. Liarte S, Bernabé-García Á, Nicolás FJ. Role of TGF-β in skin chronic wounds: a keratinocyte perspective. Cells 2020;9:306.
96. Xiao J, Wang J, Luo Y, Xu T, Zhang X. Wearable plasmonic sweat biosensor for acetaminophen drug monitoring. ACS Sens 2023;8:1766-73.
97. Tai LC, Ahn CH, Nyein HYY, et al. Nicotine monitoring with a wearable sweat band. ACS Sens 2020;5:1831-7.
98. Xu C, Song Y, Sempionatto JR, et al. A physicochemical-sensing electronic skin for stress response monitoring. Nat Electron 2024;7:168-79.
99. Bandodkar AJ, Jeang WJ, Ghaffari R, Rogers JA. Wearable sensors for biochemical sweat analysis. Annu Rev Anal Chem 2019;12:1-22.
100. Ghaffari R, Yang DS, Kim J, et al. State of sweat: emerging wearable systems for real-time, noninvasive sweat sensing and analytics. ACS Sens 2021;6:2787-801.
101. Kwon K, Kim JU, Deng Y, et al. An on-skin platform for wireless monitoring of flow rate, cumulative loss and temperature of sweat in real time. Nat Electron 2021;4:302-12.
102. Ghaffari R, Choi J, Raj MS, et al. Soft wearable systems for colorimetric and electrochemical analysis of biofluids. Adv Funct Mater 2020;30:1907269.
103. Heng W, Yang G, Kim WS, Xu K. Emerging wearable flexible sensors for sweat analysis. Bio-des Manuf 2022;5:64-84.
104. Toi PT, Trung TQ, Dang TML, Bae CW, Lee NE. Highly electrocatalytic, durable, and stretchable nanohybrid fiber for on-body sweat glucose detection. ACS Appl Mater Interfaces 2019;11:10707-17.
105. Saha T, Songkakul T, Knisely CT, et al. Wireless wearable electrochemical sensing platform with zero-power osmotic sweat extraction for continuous lactate monitoring. ACS Sens 2022;7:2037-48.
106. Huang X, Li J, Liu Y, et al. Epidermal self-powered sweat sensors for glucose and lactate monitoring. Bio-des Manuf 2022;5:201-9.
107. Parrilla M, Ortiz-Gómez I, Cánovas R, Salinas-Castillo A, Cuartero M, Crespo GA. Wearable potentiometric ion patch for on-body electrolyte monitoring in sweat: toward a validation strategy to ensure physiological relevance. Anal Chem 2019;91:8644-51.
108. Zhang X, Tang Y, Wu H, Wang Y, Niu L, Li F. Integrated aptasensor array for sweat drug analysis. Anal Chem 2022;94:7936-43.
109. Veeralingam S, Badhulika S. Two-dimensional metallic NiSe2 nanoclusters-based low-cost, flexible, amperometric sensor for detection of neurological drug carbamazepine in human sweat samples. Front Chem 2020;8:337.
110. Wang S, Liu M, Yang X, et al. An unconventional vertical fluidic-controlled wearable platform for synchronously detecting sweat rate and electrolyte concentration. Biosens Bioelectron 2022;210:114351.
111. Dautta M, Ayala-Cardona LF, Davis N, et al. Tape-free, digital wearable band for exercise sweat rate monitoring. Adv Mater Technol 2023;8:2201187.
112. Zhang B, Li J, Zhou J, et al. A three-dimensional liquid diode for soft, integrated permeable electronics. Nature 2024;628:84-92.
113. Bandodkar AJ, Lee SP, Huang I, et al. Sweat-activated biocompatible batteries for epidermal electronic and microfluidic systems. Nat Electron 2020;3:554-62.
114. Brasier N, Sempionatto JR, Bourke S, et al. Towards on-skin analysis of sweat for managing disorders of substance abuse. Nat Biomed Eng 2024.
115. Sun X, Zhao C, Li H, et al. Wearable near-field communication sensors for healthcare: materials, fabrication and application. Micromachines 2022;13:784.
116. Cheng C, Li X, Xu G, et al. Battery-free, wireless, and flexible electrochemical patch for in situ analysis of sweat cortisol via near field communication. Biosens Bioelectron 2021;172:112782.
117. Lin R, Kim HJ, Achavananthadith S, et al. Wireless battery-free body sensor networks using near-field-enabled clothing. Nat Commun 2020;11:444.
118. Heikenfeld J. Non-invasive analyte access and sensing through eccrine sweat: challenges and outlook circa 2016. Electroanalysis 2016;28:1242-9.
119. Tasangtong B, Sirichan K, Hasoon C, Na Nongkhai P, Rodthongkum N, Sameenoi Y. Fabrication of biocompatible and biodegradable cloth-based sweat sensors using polylactic acid (PLA) via stencil transparent film-printing. Sensors Actuat B Chem 2024;408:135513.
120. Feng X, Ning Y, Wu Z, et al. Defect-enriched graphene nanoribbons tune the adsorption behavior of the mediator to boost the lactate/oxygen biofuel cell. Nanomaterials 2023;13:1089.
121. Shitanda I, Takamatsu K, Niiyama A, et al. High-power lactate/O2 enzymatic biofuel cell based on carbon cloth electrodes modified with MgO-templated carbon. J Power Sources 2019;436:226844.
122. Jia W, Valdés-Ramírez G, Bandodkar AJ, Windmiller JR, Wang J. Epidermal biofuel cells: energy harvesting from human perspiration. Angew Chem Int Ed Engl 2013;52:7233-6.
123. Hartel MC, Lee D, Weiss PS, Wang J, Kim J. Resettable sweat-powered wearable electrochromic biosensor. Biosens Bioelectron 2022;215:114565.
124. Yu Y, Nassar J, Xu C, et al. Biofuel-powered soft electronic skin with multiplexed and wireless sensing for human-machine interfaces. Sci Robot 2020;5:eaaz7946.
125. Shitanda I, Morigayama Y, Iwashita R, et al. Paper-based lactate biofuel cell array with high power output. J Power Sources 2021;489:229533.
126. Shitanda I, Hirano K, Loew N, Watanabe H, Itagaki M, Mikawa T. High-performance, two-step/Bi-enzyme lactate biofuel cell with lactate oxidase and pyruvate oxidase. J Power Sources 2021;498:229935.
127. Chen X, Yin L, Lv J, et al. Stretchable and flexible buckypaper-based lactate biofuel cell for wearable electronics. Adv Funct Mater 2019;29:1905785.
128. Yin L, Moon J, Sempionatto JR, et al. A passive perspiration biofuel cell: high energy return on investment. Joule 2021;5:1888-904.
129. Bandodkar AJ, You J, Kim N, et al. Soft, stretchable, high power density electronic skin-based biofuel cells for scavenging energy from human sweat. Energy Environ Sci 2017;10:1581-9.
130. Yang Y, Su Y, Zhu X, Ye D, Chen R, Liao Q. Flexible enzymatic biofuel cell based on 1, 4-naphthoquinone/MWCNT-Modified bio-anode and polyvinyl alcohol hydrogel electrolyte. Biosens Bioelectron 2022;198:113833.
131. Escalona-villalpando R, Ortiz-ortega E, Bocanegra-ugalde J, Minteer SD, Ledesma-garcía J, Arriaga L. Clean energy from human sweat using an enzymatic patch. J Power Sources 2019;412:496-504.
132. Escalona-villalpando RA, Reid RC, Milton RD, Arriaga L, Minteer SD, Ledesma-garcía J. Improving the performance of lactate/oxygen biofuel cells using a microfluidic design. J Power Sources 2017;342:546-52.
133. Hickey DP, Reid RC, Milton RD, Minteer SD. A self-powered amperometric lactate biosensor based on lactate oxidase immobilized in dimethylferrocene-modified LPEI. Biosens Bioelectron 2016;77:26-31.
134. Han XF, Batool N, Wang WT, et al. Templated-assisted synthesis of structurally ordered intermetallic Pt3Co with ultralow loading supported on 3D porous carbon for oxygen reduction reaction. ACS Appl Mater Interfaces 2021;13:37133-41.
135. Zhang W, Zhang J, Fan S, Zhang L, Liu C, Liu J. Oxygen reduction catalyzed by bilirubin oxidase and applications in biosensors and biofuel cells. Microchem J 2022;183:108052.
136. Macedo LJ, Santo AA, Sedenho GC, et al. Three-dimensional catalysis and the efficient bioelectrocatalysis beyond surface chemistry. J Catal 2021;401:200-5.
137. Wang J, Sun M, Pei X, et al. Flexible biofuel cell-in-A-tube (iezTube): an entirely self-contained biofuel cell for wearable green bio-energy harvesting. Adv Funct Mater 2022;32:2209697.
138. Yin S, Jin Z, Miyake T. Wearable high-powered biofuel cells using enzyme/carbon nanotube composite fibers on textile cloth. Biosens Bioelectron 2019;141:111471.
139. Sun M, Gu Y, Pei X, et al. A flexible and wearable epidermal ethanol biofuel cell for on-body and real-time bioenergy harvesting from human sweat. Nano Energy 2021;86:106061.
140. Su Y, Lu L, Zhou M. Wearable microbial fuel cells for sustainable self-powered electronic skins. ACS Appl Mater Interfaces 2022;14:8664-8.
141. Mohammadifar M, Tahernia M, Yang JH, Koh A, Choi S. Biopower-on-skin: electricity generation from sweat-eating bacteria for self-powered e-skins. Nano Energy 2020;75:104994.
142. Bae CW, Chinnamani MV, Lee EH, Lee N. Stretchable non-enzymatic fuel cell-based sensor patch integrated with thread-embedded microfluidics for self-powered wearable glucose monitoring. Adv Mater Inter 2022;9:2200492.
143. Eswaran M, Rahimi S, Pandit S, Chokkiah B, Mijakovic I. A flexible multifunctional electrode based on conducting PANI/Pd composite for non-enzymatic glucose sensor and direct alcohol fuel cell applications. Fuel 2023;345:128182.
144. Wang C, Shim E, Chang HK, Lee N, Kim HR, Park J. Sustainable and high-power wearable glucose biofuel cell using long-term and high-speed flow in sportswear fabrics. Biosens Bioelectron 2020;169:112652.
145. Ortega L, Llorella A, Esquivel JP, Sabaté N. Self-powered smart patch for sweat conductivity monitoring. Microsyst Nanoeng 2019;5:3.
146. Ju J, Xiao G, Jian Y, et al. Scalable, high-performance, yarn-shaped batteries activated by an ultralow volume of sweat for self-powered sensing textiles. Nano Energy 2023;109:108304.
147. Liu Y, Huang X, Zhou J, et al. Stretchable sweat-activated battery in skin-integrated electronics for continuous wireless sweat monitoring. Adv Sci 2022;9:e2104635.
148. Liu Y, Huang X, Zhou J, et al. Bandage based energy generators activated by sweat in wireless skin electronics for continuous physiological monitoring. Nano Energy 2022;92:106755.
149. Wu M, Shi R, Zhou J, et al. Bio-inspired ultra-thin microfluidics for soft sweat-activated batteries and skin electronics. J Mater Chem A 2022;10:19662-70.
150. Zhao G, Park W, Huang X, et al. Soft, sweat-powered health status sensing and visualization system enabled by laser-fabrication. Adv Sensor Res 2023;2:2300070.
151. Xiao G, Ju J, Lu H, et al. A weavable and scalable cotton-yarn-based battery activated by human sweat for textile electronics. Adv Sci 2022;9:2103822.
152. Lv J, Thangavel G, Li Y, et al. Printable elastomeric electrodes with sweat-enhanced conductivity for wearables. Sci Adv 2021;7:eabg8433.
153. Luo Z, Wang Y, Kou B, Liu C, Zhang W, Chen L. “Sweat-chargeable” on-skin supercapacitors for practical wearable energy applications. Energy Storage Mater 2021;38:9-16.
154. Manjakkal L, Pullanchiyodan A, Yogeswaran N, Hosseini ES, Dahiya R. A wearable supercapacitor based on conductive PEDOT:PSS-coated cloth and a sweat electrolyte. Adv Mater 2020;32:1907254.
155. Dauzon E, Sallenave X, Plesse C, Goubard F, Amassian A, Anthopoulos TD. Pushing the limits of flexibility and stretchability of solar cells: a review. Adv Mater 2021;33:2101469.
156. Garland NT, Kaveti R, Bandodkar AJ. Biofluid-activated biofuel cells, batteries, and supercapacitors: a comprehensive review. Adv Mater 2023;35:2303197.
157. Yin L, Kim KN, Lv J, et al. A self-sustainable wearable multi-modular E-textile bioenergy microgrid system. Nat Commun 2021;12:1542.
158. Lv J, Jeerapan I, Tehrani F, et al. Sweat-based wearable energy harvesting-storage hybrid textile devices. Energy Environ Sci 2018;11:3431-42.
Cite This Article
Export citation file: BibTeX | EndNote | RIS
OAE Style
Zhao G, Li Z, Huang X, Zhang Q, Liu Y, Yu X. Recent advances of sweat sampling, sensing, energy-harvesting and data-display toward flexible sweat electronics. Soft Sci 2024;4:18. http://dx.doi.org/10.20517/ss.2024.04
AMA Style
Zhao G, Li Z, Huang X, Zhang Q, Liu Y, Yu X. Recent advances of sweat sampling, sensing, energy-harvesting and data-display toward flexible sweat electronics. Soft Science. 2024; 4(2): 18. http://dx.doi.org/10.20517/ss.2024.04
Chicago/Turabian Style
Guangyao Zhao, Zhiyuan Li, Xingcan Huang, Qiang Zhang, Yiming Liu, Xinge Yu. 2024. "Recent advances of sweat sampling, sensing, energy-harvesting and data-display toward flexible sweat electronics" Soft Science. 4, no.2: 18. http://dx.doi.org/10.20517/ss.2024.04
ACS Style
Zhao, G.; Li Z.; Huang X.; Zhang Q.; Liu Y.; Yu X. Recent advances of sweat sampling, sensing, energy-harvesting and data-display toward flexible sweat electronics. Soft. Sci. 2024, 4, 18. http://dx.doi.org/10.20517/ss.2024.04
About This Article
Special Issue
Copyright
Data & Comments
Data
0
Comments
Comments must be written in English. Spam, offensive content, impersonation, and private information will not be permitted. If any comment is reported and identified as inappropriate content by OAE staff, the comment will be removed without notice. If you have any queries or need any help, please contact us at support@oaepublish.com.