Volume 3, Issue 2 (June, 2024) – 2 articles
Cover Picture: Inorganic phase change cold storage materials have garnered significant interest in cold chain transportation due to their high energy storage density. Nevertheless, practical applications have been hindered by inherent limitations such as high supercooling and susceptibility to phase separation. To address these challenges, this study devised 3D-Hectorite/sodium chloride (NaCl) composite phase change cold storage materials by utilizing 3D-Hectorite aerogel to adsorb NaCl solution, effectively mitigating the issue of phase separation common in such materials. Additionally, various concentrations of nucleating agents such as SrCl2·6H2O, borax, and diatomite were introduced for step cooling curve tests, establishing 0.03% diatomite as the optimal concentration for nucleation, reducing the supercooling of the NaCl solution to 1.1 °C. The results showed that the latent heat and thermal conductivity of 3D-Hectorite/NaCl were 215.30 J/g and 0.6315 ± 0.013 W/mK, respectively. The phase transition temperature could be adjusted in the range of -33~0 °C by changing the concentration of NaCl to meet the different temperature requirements. Furthermore, exceptional cyclic stability was observed even after subjecting the material to ten dissolution-solidification cycles. Analyzing the temperature change of the air inside the insulation bag showed that, compared with ice, 3D-Hectorite/NaCl can be applied to meet lower cooling temperature requirements, demonstrating good prospects for its application in cold chain transportation.
view this paper 
