REFERENCES
1. Zheng J, Ji G, Fan X, et al. High-fluorinated electrolytes for Li-S batteries. Adv Energy Mater 2019;9:1803774.
2. Tan SJ, Yue J, Hu XC, et al. Nitriding-interface-regulated lithium plating enables flame-retardant electrolytes for high-voltage lithium metal batteries. Angew Chem Int Ed Engl 2019;58:7802-7.
3. Wang WP, Zhang J, Yin YX, et al. A rational reconfiguration of electrolyte for high-energy and long-life lithium-chalcogen batteries. Adv Mater 2020;32:e2000302.
4. Lee Y, Fujiki S, Jung C, et al. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes. Nat Energy 2020;5:299-308.
5. Chen X, Shang M, Niu J. Pre-solid electrolyte interphase-covered Li metal anode with improved electro-chemo-mechanical reliability in high-energy-density batteries. ACS Appl Mater Interfaces 2021;13:34064-73.
6. Guo Z, Pang Y, Xia S, et al. Uniform and anisotropic solid electrolyte membrane enables superior solid-state Li metal batteries. Adv Sci (Weinh) 2021;8:e2100899.
7. Wang L, Jin Z, Ban X, et al. Lithiophilic nio nanoarrays-modified Ni skeletons with vertical channels for high-loading Li metal batteries. J Electrochem Soc 2021;168:050536.
8. Pathak R, Chen K, Wu F, et al. Advanced strategies for the development of porous carbon as a Li host/current collector for lithium metal batteries. Energy Storage Materials 2021;41:448-65.
9. Lu R, Zhang B, Cheng Y, et al. Dual-regulation of ions/electrons in a 3D Cu-CuxO host to guide uniform lithium growth for high-performance lithium metal anodes. J Mater Chem A 2021;9:10393-403.
10. Cha E, Yun JH, Ponraj R, Kim DK. A mechanistic review of lithiophilic materials: resolving lithium dendrites and advancing lithium metal-based batteries. Mater Chem Front 2021;5:6294-314.
11. Yan K, Lu Z, Lee H, et al. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth. Nat Energy 2016;1:16010.
12. Chen XR, Zhao BC, Yan C, Zhang Q. Review on Li deposition in working batteries: from nucleation to early growth. Adv Mater 2021;33:e2004128.
13. Wang D, Liu H, Liu F, et al. Phase-separation-induced porous lithiophilic polymer coating for high-efficiency lithium metal batteries. Nano Lett 2021;21:4757-64.
15. Su B, Tian Y, Jiang L. Bioinspired interfaces with superwettability: from materials to chemistry. J Am Chem Soc 2016;138:1727-48.
17. Wang J, Wang H, Xie J, et al. Fundamental study on the wetting property of liquid lithium. Energy Storage Materials 2018;14:345-50.
18. Luo W, Gong Y, Zhu Y, et al. Reducing interfacial resistance between garnet-structured solid-state electrolyte and Li-metal anode by a germanium layer. Adv Mater 2017;29:1606042.
19. Zhang Y, Liu B, Hitz E, et al. A carbon-based 3D current collector with surface protection for Li metal anode. Nano Res 2017;10:1356-65.
20. Fu KK, Gong Y, Fu Z, et al. Transient behavior of the metal interface in lithium metal-garnet batteries. Angew Chem Int Ed Engl 2017;56:14942-7.
21. Liu B, Gong Y, Fu K, et al. Garnet solid electrolyte protected Li-metal batteries. ACS Appl Mater Interfaces 2017;9:18809-15.
22. Wang C, Gong Y, Liu B, et al. Conformal, nanoscale ZnO surface modification of garnet-based solid-state electrolyte for lithium metal anodes. Nano Lett 2017;17:565-71.
23. Fu KK, Gong Y, Liu B, et al. Toward garnet electrolyte-based Li metal batteries: An ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface. Sci Adv 2017;3:e1601659.
24. Lin D, Liu Y, Cui Y. Reviving the lithium metal anode for high-energy batteries. Nat Nanotechnol 2017;12:194-206.
25. Chen L, Connell JG, Nie A, et al. Lithium metal protected by atomic layer deposition metal oxide for high performance anodes. J Mater Chem A 2017;5:12297-309.
26. Li NW, Yin YX, Li JY, Zhang CH, Guo YG. Passivation of lithium metal anode via hybrid ionic liquid electrolyte toward stable Li plating/stripping. Adv Sci (Weinh) 2017;4:1600400.
27. Yan C, Cheng XB, Tian Y, et al. Dual-layered film protected lithium metal anode to enable dendrite-free lithium deposition. Adv Mater 2018;30:e1707629.
28. Fan X, Chen L, Borodin O, et al. Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries. Nat Nanotechnol 2018;13:715-22.
29. Tan S, Wang W, Tian Y, Xin S, Guo Y. Advanced electrolytes enabling safe and stable rechargeable Li-metal batteries: progress and prospects. Adv Funct Mater 2021;31:2105253.
30. Kwon B, Ha S, Kim D, Koo D, Lee J, Lee KT. Electrochemically active red P/BaTiO3-based protective layers suppressing Li dendrite growth for Li metal batteries. Adv Mater Interfaces 2020;7:2001037.
31. Kim Y, Koo D, Ha S, et al. Two-dimensional phosphorene-derived protective layers on a lithium metal anode for lithium-oxygen batteries. ACS Nano 2018;12:4419-30.
32. Li NW, Yin YX, Yang CP, Guo YG. An artificial solid electrolyte interphase layer for stable lithium metal anodes. Adv Mater 2016;28:1853-8.
33. Guo H, Hou G, Guo J, et al. Enhanced cycling performance of Li-O2 battery by using a Li3PO4-protected lithium anode in DMSO-based electrolyte. ACS Appl Energy Mater 2018;1:5511-7.
34. Pang Q, Liang X, Shyamsunder A, Nazar LF. An in vivo formed solid electrolyte surface layer enables stable plating of Li metal. Joule 2017;1:871-86.
35. Gao Y, Zhao Y, Li YC, Huang Q, Mallouk TE, Wang D. Interfacial chemistry regulation via a skin-grafting strategy enables high-performance lithium-metal batteries. J Am Chem Soc 2017;139:15288-91.
36. Li NW, Shi Y, Yin YX, et al. A flexible solid electrolyte interphase layer for long-life lithium metal anodes. Angew Chem Int Ed Engl 2018;57:1505-9.
37. Hu Z, Zhang S, Dong S, et al. Poly(ethyl α-cyanoacrylate)-based artificial solid electrolyte interphase layer for enhanced interface stability of Li metal anodes. Chem Mater 2017;29:4682-9.
38. Jin Q, Zhang X, Gao H, Li L, Zhang Z. Novel LixSiSy/Nafion as an artificial SEI film to enable dendrite-free Li metal anodes and high stability Li-S batteries. J Mater Chem A 2020;8:8979-88.
39. Liang J, Li X, Zhao Y, et al. An air-stable and dendrite-free Li anode for highly stable all-solid-state sulfide-based Li batteries. Adv Energy Mater 2019;9:1902125.
40. Yan C, Cheng XB, Yao YX, et al. An armored mixed conductor interphase on a dendrite-free lithium-metal anode. Adv Mater 2018;30:e1804461.
41. Jiang Z, Jin L, Han Z, et al. Facile generation of polymer-alloy hybrid layers for dendrite-free lithium-metal anodes with improved moisture stability. Angew Chem Int Ed Engl 2019;58:11374-8.
42. Cui Q, Zhang P, Wang J. Electrochemical oxidation of Li2O2 surface-doped with Li2CO3. ACS Appl Mater Interfaces 2020;12:6627-32.
43. Gireaud L, Grugeon S, Laruelle S, Yrieix B, Tarascon J. Lithium metal stripping/plating mechanisms studies: a metallurgical approach. Electrochem commun 2006;8:1639-49.
44. Tang W, Yin X, Chen Z, Fu W, Loh KP, Zheng GW. Chemically polished lithium metal anode for high energy lithium metal batteries. Energy Storage Materials 2018;14:289-96.
45. Gu Y, Wang WW, Li YJ, et al. Designable ultra-smooth ultra-thin solid-electrolyte interphases of three alkali metal anodes. Nat Commun 2018;9:1339.
46. Gu Y, Wang W, He J, et al. Electrochemical polishing of lithium metal surface for highly demanding solid-electrolyte interphase. ChemElectroChem 2019;6:181-8.
47. Wang SH, Yue J, Dong W, et al. Tuning wettability of molten lithium via a chemical strategy for lithium metal anodes. Nat Commun 2019;10:4930.
48. Lin D, Liu Y, Liang Z, et al. Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes. Nat Nanotechnol 2016;11:626-32.
49. Liang Z, Lin D, Zhao J, et al. Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating. Proc Natl Acad Sci U S A 2016;113:2862-7.
50. Zhang Y, Luo W, Wang C, et al. High-capacity, low-tortuosity, and channel-guided lithium metal anode. Proc Natl Acad Sci U S A 2017;114:3584-9.
51. Liu Y, Lin D, Liang Z, Zhao J, Yan K, Cui Y. Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode. Nat Commun 2016;7:10992.
52. Fan L, Li S, Liu L, et al. Enabling stable lithium metal anode via 3D inorganic skeleton with superlithiophilic interphase. Adv Energy Mater 2018;8:1802350.
53. Zhang Y, Wang C, Pastel G, et al. 3D wettable framework for dendrite-free alkali metal anodes. Adv Energy Mater 2018;8:1800635.
54. Zhang R, Chen X, Shen X, et al. Coralloid carbon fiber-based composite lithium anode for robust lithium metal batteries. Joule 2018;2:764-77.
55. Xu Y, Li T, Wang L, Kang Y. Interlayered dendrite-free lithium plating for high-performance lithium-metal batteries. Adv Mater 2019;31:e1901662.
56. Duan H, Zhang J, Chen X, et al. Uniform nucleation of lithium in 3D current collectors via bromide intermediates for stable cycling lithium metal batteries. J Am Chem Soc 2018;140:18051-7.
57. Zhang R, Chen XR, Chen X, et al. Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite-free lithium metal anodes. Angew Chem Int Ed Engl 2017;56:7764-8.
58. Chen X, Chen XR, Hou TZ, et al. Lithiophilicity chemistry of heteroatom-doped carbon to guide uniform lithium nucleation in lithium metal anodes. Sci Adv 2019;5:eaau7728.
59. Li K, Hu Z, Ma J, Chen S, Mu D, Zhang J. A 3D and stable lithium anode for high-performance lithium-iodine batteries. Adv Mater 2019;31:e1902399.
60. Ye H, Zheng ZJ, Yao HR, et al. Guiding uniform Li plating/stripping through lithium-aluminum alloying medium for long-life Li metal batteries. Angew Chem Int Ed Engl 2019;58:1094-9.
61. Wu C, Huang H, Lu W, et al. Mg doped Li-LiB alloy with in situ formed lithiophilic LiB skeleton for lithium metal batteries. Adv Sci (Weinh) 2020;7:1902643.
62. Wei C, Tan L, Tao Y, et al. Interfacial passivation by room-temperature liquid metal enabling stable 5 V-class lithium-metal batteries in commercial carbonate-based electrolyte. Energy Storage Materials 2021;34:12-21.
63. Ma Q, Zeng X, Yue J, et al. Viscoelastic and nonflammable interface design-enabled dendrite-free and safe solid lithium metal batteries. Adv Energy Mater 2019;9:1803854.
64. Wang Z, Tan R, Wang H, et al. A metal-organic-framework-based electrolyte with nanowetted interfaces for high-energy-density solid-state lithium battery. Adv Mater 2018;30:1704436.
65. Zhang Z, Zhang L, Liu Y, et al. Interface-engineered Li7La3Zr2O12-based garnet solid electrolytes with suppressed Li-dendrite formation and enhanced electrochemical performance. ChemSusChem 2018;11:3774-82.
66. Zeng X, Yin Y, Shi Y, et al. Lithiation-derived repellent toward lithium anode safeguard in quasi-solid batteries. Chem 2018;4:298-307.
67. Fan W, Li NW, Zhang X, et al. A dual-salt gel polymer electrolyte with 3D cross-linked polymer network for dendrite-free lithium metal batteries. Adv Sci (Weinh) 2018;5:1800559.
68. Zuo TT, Shi Y, Wu XW, et al. Constructing a stable lithium metal-gel electrolyte interface for quasi-solid-state lithium batteries. ACS Appl Mater Interfaces 2018;10:30065-70.
69. Zhou W, Wang S, Li Y, Xin S, Manthiram A, Goodenough JB. Plating a dendrite-free lithium anode with a polymer/ceramic/polymer sandwich electrolyte. J Am Chem Soc 2016;138:9385-8.
70. Hartmann P, Leichtweiss T, Busche MR, et al. Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes. J Phys Chem C 2013;117:21064-74.
71. Duan H, Fan M, Chen WP, et al. Extended electrochemical window of solid electrolytes via heterogeneous multilayered structure for high-voltage lithium metal batteries. Adv Mater 2019;31:e1807789.
72. Duan H, Yin YX, Shi Y, et al. Dendrite-free Li-metal battery enabled by a thin asymmetric solid electrolyte with engineered layers. J Am Chem Soc 2018;140:82-5.
73. Liang JY, Zeng XX, Zhang XD, et al. Engineering Janus interfaces of ceramic electrolyte via distinct functional polymers for stable high-voltage Li-metal batteries. J Am Chem Soc 2019;141:9165-9.
74. Li M, Frerichs JE, Kolek M, et al. Solid-state lithium-sulfur battery enabled by Thio-LiSICON/polymer composite electrolyte and sulfurized polyacrylonitrile cathode. Adv Funct Mater 2020;30:1910123.
75. Wang C, Xie H, Zhang L, et al. Universal soldering of lithium and sodium alloys on various substrates for batteries. Adv Energy Mater 2018;8:1701963.
76. Duan J, Wu W, Nolan AM, et al. Lithium-graphite paste: an interface compatible anode for solid-state batteries. Adv Mater 2019;31:e1807243.
77. Zheng H, Wu S, Tian R, et al. Intrinsic lithiophilicity of Li-garnet electrolytes enabling high-rate lithium cycling. Adv Funct Mater 2019;30:1906189.
78. Luo W, Gong Y, Zhu Y, et al. Transition from superlithiophobicity to superlithiophilicity of garnet solid-state electrolyte. J Am Chem Soc 2016;138:12258-62.
79. Lu Y, Huang X, Ruan Y, et al. An in situ element permeation constructed high endurance Li-LLZO interface at high current densities. J Mater Chem A 2018;6:18853-8.
80. Yan M, Liang J, Zuo T, et al. Stabilizing polymer-lithium interface in a rechargeable solid battery. Adv Funct Mater 2019;30:1908047.
81. Ruan Y, Lu Y, Huang X, et al. Acid induced conversion towards a robust and lithiophilic interface for Li-Li7La3Zr2O12 solid-state batteries. J Mater Chem A 2019;7:14565-74.
82. Alexander GV, Indu M, Kamakshy S, Murugan R. Development of stable and conductive interface between garnet structured solid electrolyte and lithium metal anode for high performance solid-state battery. Electrochimica Acta 2020;332:135511.
83. Cui C, Yang C, Eidson N, et al. A highly reversible, dendrite-free lithium metal anode enabled by a lithium-fluoride-enriched interphase. Adv Mater 2020;32:e1906427.
84. Fan X, Ji X, Han F, et al. Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery. Sci Adv 2018;4:eaau9245.
85. Xu R, Han F, Ji X, Fan X, Tu J, Wang C. Interface engineering of sulfide electrolytes for all-solid-state lithium batteries. Nano Energy 2018;53:958-66.
86. Xu H, Li Y, Zhou A, et al. Li3N-modified garnet electrolyte for all-solid-state lithium metal batteries operated at 40 °C. Nano Lett 2018;18:7414-8.
