REFERENCES
1. Cheng XB, Zhang R, Zhao CZ, Zhang Q. Toward safe lithium metal anode in rechargeable batteries: a review. Chem Rev 2017;117:10403-73.
2. Albertus P, Babinec S, Litzelman S, Newman A. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries. Nat Energy 2018;3:16-21.
3. Chen H, Ling M, Hencz L, et al. Exploring chemical, mechanical, and electrical functionalities of binders for advanced energy-storage devices. Chem Rev 2018;118:8936-82.
5. Zhou L, Zhang K, Hu Z, et al. Recent Developments on and prospects for electrode materials with hierarchical structures for lithium-ion batteries. Adv Energy Mater 2018;8:1701415.
7. Zhang W, Nie J, Li F, Wang ZL, Sun C. A durable and safe solid-state lithium battery with a hybrid electrolyte membrane. Nano Energy 2018;45:413-9.
8. Tran MK, Rodrigues MF, Kato K, Babu G, Ajayan PM. Deep eutectic solvents for cathode recycling of Li-ion batteries. Nat Energy 2019;4:339-45.
9. Zou C, Zhang L, Hu X, Wang Z, Wik T, Pecht M. A review of fractional-order techniques applied to lithium-ion batteries, lead-acid batteries, and supercapacitors. J Power Sources 2018;390:286-96.
10. Winslow KM, Laux SJ, Townsend TG. A review on the growing concern and potential management strategies of waste lithium-ion batteries. Resour Conserv Recy 2018;129:263-77.
11. Wu H, Gong Y, Yu Y, Huang K, Wang L. Superior "green" electrode materials for secondary batteries: through the footprint family indicators to analyze their environmental friendliness. Environ Sci Pollut Res Int 2019;26:36538-57.
12. Yu L, Yu XY, Lou XWD. The design and synthesis of hollow micro-/nanostructures: present and future trends. Adv Mater 2018;30:e1800939.
13. Young C, Wang J, Kim J, Sugahara Y, Henzie J, Yamauchi Y. Controlled chemical vapor deposition for synthesis of nanowire arrays of metal-organic frameworks and their thermal conversion to carbon/metal oxide hybrid materials. Chem Mater 2018;30:3379-86.
14. Yang C, Chen J, Ji X, et al. Aqueous Li-ion battery enabled by halogen conversion-intercalation chemistry in graphite. Nature 2019;569:245-50.
15. Xu W, Wang J, Ding F, et al. Lithium metal anodes for rechargeable batteries. Energy Environ Sci 2014;7:513-37.
16. Wu F, Maier J, Yu Y. Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries. Chem Soc Rev 2020;49:1569-614.
17. Wei Z, Wang L, Zhuo M, Ni W, Wang H, Ma J. Layered tin sulfide and selenide anode materials for Li- and Na-ion batteries. J Mater Chem A 2018;6:12185-214.
18. Schmuch R, Wagner R, Hörpel G, Placke T, Winter M. Performance and cost of materials for lithium-based rechargeable automotive batteries. Nat Energy 2018;3:267-78.
19. Liu Y, Zhu Y, Cui Y. Challenges and opportunities towards fast-charging battery materials. Nat Energy 2019;4:540-50.
20. Liu J, Bao Z, Cui Y, et al. Pathways for practical high-energy long-cycling lithium metal batteries. Nat Energy 2019;4:180-6.
21. Yan W, Gao X, Jin X, et al. Nonporous Gel electrolytes enable long cycling at high current density for lithium-metal anodes. ACS Appl Mater Interfaces 2021;13:14258-66.
23. Li L, Zheng Y, Zhang S, Yang J, Shao Z, Guo Z. Recent progress on sodium ion batteries: potential high-performance anodes. Energy Environ Sci 2018;11:2310-40.
24. Hwang J, Myung S, Sun Y. Recent progress in rechargeable potassium batteries. Adv Funct Mater 2018;28:1802938.
25. Han F, Westover AS, Yue J, et al. High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes. Nat Energy 2019;4:187-96.
26. Geng P, Zheng S, Tang H, et al. Transition metal sulfides based on graphene for electrochemical energy storage. Adv Energy Mater 2018;8:1703259.
27. Gao Y, Yan Z, Gray JL, et al. Polymer-inorganic solid-electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions. Nat Mater 2019;18:384-9.
28. Fang R, Chen K, Yin L, Sun Z, Li F, Cheng HM. The regulating role of carbon nanotubes and graphene in lithium-ion and lithium-sulfur batteries. Adv Mater 2019;31:e1800863.
29. Famprikis T, Canepa P, Dawson JA, Islam MS, Masquelier C. Fundamentals of inorganic solid-state electrolytes for batteries. Nat Mater 2019;18:1278-91.
30. Ji L, Lin Z, Alcoutlabi M, Zhang X. Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries. Energy Environ Sci 2011;4:2682.
31. Kim S, Seo D, Ma X, Ceder G, Kang K. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries. Adv Energy Mater 2012;2:710-21.
32. Didier C, Pang WK, Guo Z, Schmid S, Peterson VK. Phase evolution and intermittent disorder in electrochemically lithiated graphite determined using in operando neutron diffraction. Chem Mater 2020;32:2518-31.
33. Li Y, Lu Y, Adelhelm P, Titirici MM, Hu YS. Intercalation chemistry of graphite: alkali metal ions and beyond. Chem Soc Rev 2019;48:4655-87.
34. Kumar R, Sahoo S, Joanni E, et al. Recent progress in the synthesis of graphene and derived materials for next generation electrodes of high performance lithium ion batteries. Prog Energy Combust Sci 2019;75:100786.
35. Luo Y, Yan Y, Zheng S, Xue H, Pang H. Graphitic carbon nitride based materials for electrochemical energy storage. J Mater Chem A 2019;7:901-24.
36. Zhang W. A review of the electrochemical performance of alloy anodes for lithium-ion batteries. J Power Sources 2011;196:13-24.
37. Verma P, Maire P, Novák P. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries. Electrochimica Acta 2010;55:6332-41.
38. Reddy AL, Srivastava A, Gowda SR, Gullapalli H, Dubey M, Ajayan PM. Synthesis of nitrogen-doped graphene films for lithium battery application. ACS Nano 2010;4:6337-42.
39. Marom R, Amalraj SF, Leifer N, Jacob D, Aurbach D. A review of advanced and practical lithium battery materials. J Mater Chem 2011;21:9938.
40. Ding J, Hu W, Paek E, Mitlin D. Review of hybrid ion capacitors: from aqueous to lithium to sodium. Chem Rev 2018;118:6457-98.
42. Nguyen BH, Nguyen VH. Promising applications of graphene and graphene-based nanostructures. Adv Nat Sci: Nanosci Nanotechnol 2016;7:023002.
43. Kleiner K, Ehrenberg H. Challenges considering the degradation of cell components in commercial lithium-ion cells: a review and evaluation of present systems. Top Curr Chem (Cham) 2017;375:54.
44. Senyshyn A, Mühlbauer M, Dolotko O, Ehrenberg H. Low-temperature performance of Li-ion batteries: the behavior of lithiated graphite. J Power Sources 2015;282:235-40.
45. Persson K, Sethuraman VA, Hardwick LJ, et al. Lithium diffusion in graphitic carbon. J Phys Chem Lett 2010;1:1176-80.
46. Chen M, Wang Z, Wang A, et al. Novel self-assembled natural graphite based composite anodes with improved kinetic properties in lithium-ion batteries. J Mater Chem A 2016;4:9865-72.
47. Zhang C, Cai X, Chen W, et al. 3D porous silicon/N-doped carbon composite derived from bamboo charcoal as high-performance anode material for lithium-Ion batteries. ACS Sustainable Chem Eng 2018;6:9930-9.
48. Nuroniah I, Priyono S, Subhan A, Prihandoko B, Suhandi A, Sohib A. Synthesis and characterization of Al-doped Li4Ti5O12 with Sol Gel method for anode material lithium ion battery. Materials Today: Proceedings 2019;13:65-70.
49. Yin P, Peng H, Xiao Y, Lin T, Lin J. Facile synthesis of an Al-doped carbon-coated Li4Ti5O12 anode for high-rate lithium-ion batteries. RSC Adv 2016;6:77151-60.
50. Yi T, Peng P, Han X, Zhu Y, Luo S. Interconnected Co3O4@CoNiO2@PPy nanorod and nanosheet composite grown on nickel foam as binder-free electrodes for Li-ion batteries. Solid State Ionics 2019;329:131-9.
51. Dou Q, Li Y, Ming Ng K. CoO/CoFe2O4 core/shell nanoparticles assembled in carbon sheets as anode materials for lithium ion battery. J Alloys Compds 2019;808:151691.
52. Xiang G, Meng Y, Qu G, et al. Dual-functional NiCo2S4 polyhedral architecture with superior electrochemical performance for supercapacitors and lithium-ion batteries. Sci Bull 2020;65:443-51.
53. Lv G, Zhu B, Li X, et al. Simultaneous perforation and doping of Si nanoparticles for lithium-ion battery anode. ACS Appl Mater Interfaces 2017;9:44452-7.
54. Jiang Q, Li J, Yuan N, Wu Z, Tang J. Black phosphorus with superior lithium ion batteries performance directly synthesized by the efficient thermal-vaporization method. Electrochimica Acta 2018;263:272-6.
55. Youn DH, Patterson NA, Park H, Heller A, Mullins CB. Facile synthesis of Ge/N-doped carbon spheres with varying nitrogen content for lithium ion battery anodes. ACS Appl Mater Interfaces 2016;8:27788-94.
56. Liu Z, Song T, Paik U. Sb-based electrode materials for rechargeable batteries. J Mater Chem A 2018;6:8159-93.
57. Zhang H, Eshetu GG, Judez X, Li C, Rodriguez-Martínez LM, Armand M. Electrolyte additives for lithium metal anodes and rechargeable lithium metal batteries: progress and perspectives. Angew Chem Int Ed Engl 2018;57:15002-27.
58. Zhang X, Cheng X, Chen X, Yan C, Zhang Q. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries. Adv Funct Mater 2017;27:1605989.
59. Schipper F, Aurbach D. A brief review: Past, present and future of lithium ion batteries. Russ J Electrochem 2016;52:1095-121.
60. Xu J, Dou Y, Wei Z, et al. Recent progress in graphite intercalation compounds for rechargeable metal (Li, Na, K, Al)-Ion batteries. Adv Sci (Weinh) 2017;4:1700146.
61. Cheng Q, Zhang Y. Multi-channel graphite for high-rate lithium ion battery. J Electrochem Soc 2018;165:A1104-9.
62. Wang Z, Selbach SM, Grande T. Van der Waals density functional study of the energetics of alkali metal intercalation in graphite. RSC Adv 2014;4:3973-83.
63. Son D, Kim J, Raj MR, Lee G. Elucidating the structural redox behaviors of nanostructured expanded graphite anodes toward fast-charging and high-performance lithium-ion batteries. Carbon 2021;175:187-201.
64. Goodenough JB, Park KS. The Li-ion rechargeable battery: a perspective. J Am Chem Soc 2013;135:1167-76.
65. Kim DS, Kim YE, Kim H. Improved fast charging capability of graphite anodes via amorphous Al2O3 coating for high power lithium ion batteries. J Power Sources 2019;422:18-24.
66. Zheng H, Qu Q, Zhang L, Liu G, Battaglia VS. Hard carbon: a promising lithium-ion battery anode for high temperature applications with ionic electrolyte. RSC Adv 2012;2:4904.
67. Liu J, Xue D. Hollow nanostructured anode materials for Li-ion batteries. Nanoscale Res Lett 2010;5:1525-34.
68. Malgras V, Tang J, Wang J, et al. Fabrication of nanoporous carbon materials with hard- and soft-templating approaches: a review. J Nanosci Nanotechnol 2019;19:3673-85.
69. Huang S, Li Z, Wang B, et al. N-doping and defective nanographitic domain coupled hard carbon nanoshells for high performance lithium/sodium storage. Adv Funct Mater 2018;28:1706294.
70. Singh V, Joung D, Zhai L, Das S, Khondaker SI, Seal S. Graphene based materials: past, present and future. Progress in Materials Science 2011;56:1178-271.
71. Huang X, Yin Z, Wu S, et al. Graphene-based materials: synthesis, characterization, properties, and applications. Small 2011;7:1876-902.
72. Ai W, Luo Z, Jiang J, et al. Nitrogen and sulfur codoped graphene: multifunctional electrode materials for high-performance li-ion batteries and oxygen reduction reaction. Adv Mater 2014;26:6186-92.
73. Wang J, Xia Y, Liu Y, Li W, Zhao D. Mass production of large-pore phosphorus-doped mesoporous carbon for fast-rechargeable lithium-ion batteries. Energy Storage Materials 2019;22:147-53.
74. Zhang B, Kang F, Tarascon J, Kim J. Recent advances in electrospun carbon nanofibers and their application in electrochemical energy storage. Prog Mater Sci Science 2016;76:319-80.
75. Qie L, Chen WM, Wang ZH, et al. Nitrogen-doped porous carbon nanofiber webs as anodes for lithium ion batteries with a superhigh capacity and rate capability. Adv Mater 2012;24:2047-50.
76. Wen L, Li F, Cheng HM. Carbon Nanotubes and graphene for flexible electrochemical energy storage: from materials to devices. Adv Mater 2016;28:4306-37.
77. Zhao MQ, Ren CE, Ling Z, et al. Flexible MXene/carbon nanotube composite paper with high volumetric capacitance. Adv Mater 2015;27:339-45.
78. Yu D, Goh K, Wang H, et al. Scalable synthesis of hierarchically structured carbon nanotube-graphene fibres for capacitive energy storage. Nat Nanotechnol 2014;9:555-62.
79. Zhu G, Liu H, Zhuang J, Wang C, Wang Y, Xia Y. Carbon-coated nano-sized Li4Ti5O12 nanoporous micro-sphere as anode material for high-rate lithium-ion batteries. Energy Environ Sci 2011;4:4016.
80. Zhao B, Ran R, Liu M, Shao Z. A comprehensive review of Li4Ti5O12-based electrodes for lithium-ion batteries: the latest advancements and future perspectives. Mater Sci Eng Rep 2015;98:1-71.
81. Yi T, Yang S, Xie Y. Recent advances of Li4Ti5O12 as a promising next generation anode material for high power lithium-ion batteries. J Mater Chem A 2015;3:5750-77.
82. Sun X, Radovanovic PV, Cui B. Advances in spinel Li4Ti5O12 anode materials for lithium-ion batteries. New J Chem 2015;39:38-63.
83. Hsieh C, Chen I, Jiang Y, Lin J. Synthesis of spinel lithium titanate anodes incorporated with rutile titania nanocrystallites by spray drying followed by calcination. Solid State Ionics 2011;201:60-7.
84. Ge H, Li N, Li D, Dai C, Wang D. Study on the theoretical capacity of spinel lithium titanate induced by low-potential intercalation. J Phys Chem C 2009;113:6324-6.
85. Zhu Z, Cheng F, Chen J. Investigation of effects of carbon coating on the electrochemical performance of Li4Ti5O12/C nanocomposites. J Mater Chem A 2013;1:9484.
86. Liu J, Song K, van Aken PA, Maier J, Yu Y. Self-supported Li4Ti5O12-C nanotube arrays as high-rate and long-life anode materials for flexible Li-ion batteries. Nano Lett 2014;14:2597-603.
87. Liu Y, Zhao M, Xu H, Chen J. Fabrication of continuous conductive network for Li4Ti5O12 anode by Cu-doping and graphene wrapping to boost lithium storage. J Alloys Compds 2019;780:1-7.
88. Khan F, Oh M, Kim JH. N-functionalized graphene quantum dots: Charge transporting layer for high-rate and durable Li4Ti5O12-based Li-ion battery. Chem Eng J 2019;369:1024-33.
89. Yan L, Qian S, Yu H, et al. Carbon-enhanced electrochemical performance for spinel Li5Cr7Ti6O25 as a lithium host material. ACS Sustainable Chem Eng 2017;5:957-64.
90. Mei J, Yi TF, Li XY, Zhu YR, Xie Y, Zhang CF. Robust strategy for crafting Li5Cr7Ti6O25@CeO2 composites as high-performance anode material for lithium-ion battery. ACS Appl Mater Interfaces 2017;9:23662-71.
91. Wang Y, Zhu W. Micro/nano-structured Li4Ti5O12 as high rate anode material for lithium ion batteries. Solid State Ionics 2020;349:115297.
92. Chen C, Guo H, Zhao Z, et al. A robust strategy for engineering Li4Ti5O12 hollow micro-cube as superior rate anode for lithium ion batteries. Electrochimica Acta 2019;293:141-8.
93. Han J, Huang Y, Goodenough JB. New anode framework for rechargeable lithium batteries. Chem Mater 2011;23:2027-9.
94. Han J, Goodenough JB. 3-V Full cell performance of anode framework TiNb2O7/Spinel LiNi0.5Mn1.5O4. Chem Mater 2011;23:3404-7.
95. Deng Q, Fu Y, Zhu C, Yu Y. Niobium-based oxides toward advanced electrochemical energy storage: recent advances and challenges. Small 2019;15:e1804884.
96. Yan L, Rui X, Chen G, Xu W, Zou G, Luo H. Recent advances in nanostructured Nb-based oxides for electrochemical energy storage. Nanoscale 2016;8:8443-65.
97. Shen P, Zhang B, Wang Y, et al. Nanoscale niobium oxides anode for electrochemical lithium and sodium storage: a review of recent improvements. J Nanostruct Chem 2021;11:33-68.
98. Lim E, Jo C, Kim H, et al. Facile synthesis of Nb2O5@Carbon core-shell nanocrystals with controlled crystalline structure for high-power anodes in hybrid supercapacitors. ACS Nano 2015;9:7497-505.
99. Yi T, Sari HMK, Li X, et al. A review of niobium oxides based nanocomposites for lithium-ion batteries, sodium-ion batteries and supercapacitors. Nano Energy 2021;85:105955.
100. Zhang C(, Maloney R, Lukatskaya MR, et al. Synthesis and electrochemical properties of niobium pentoxide deposited on layered carbide-derived carbon. J Power Sources 2015;274:121-9.
101. Lou S, Cheng X, Wang L, et al. High-rate capability of three-dimensionally ordered macroporous T-Nb2O5 through Li+ intercalation pseudocapacitance. J Power Sources 2017;361:80-6.
102. Hu L, Luo L, Tang L, Lin C, Li R, Chen Y. Ti2Nb2xO4+5x anode materials for lithium-ion batteries: a comprehensive review. J Mater Chem A 2018;6:9799-815.
103. Lin C, Wang G, Lin S, Li J, Lu L. TiNb6O17: a new electrode material for lithium-ion batteries. Chem Commun (Camb) 2015;51:8970-3.
104. Li H, Zhang Y, Tang Y, et al. TiNb2O7 nanowires with high electrochemical performances as anodes for lithium ion batteries. Appl Surf Sci 2019;475:942-6.
105. Li H, Shen L, Wang J, et al. Three-dimensionally ordered porous TiNb2O7 nanotubes: a superior anode material for next generation hybrid supercapacitors. J Mater Chem A 2015;3:16785-90.
106. Gao J, Cheng X, Lou S, et al. Self-doping Ti1-Nb2+O7 anode material for lithium-ion battery and its electrochemical performance. J Alloys Compds 2017;728:534-40.
107. Yu Z, Waclawik ER, Wang Z, Gu X, Yuan Y, Zheng Z. Dual modification of TiNb2O7 with nitrogen dopants and oxygen vacancies for selective aerobic oxidation of benzylamine to imine under green light. J Mater Chem A 2017;5:4607-15.
108. Wan G, Yang L, Shi S, Tang Y, Xu X, Wang G. Ti2Nb10O29 microspheres coated with ultrathin N-doped carbon layers by atomic layer deposition for enhanced lithium storage. Chem Commun (Camb) 2019;55:517-20.
109. Lyu H, Li J, Wang T, et al. Carbon coated porous titanium niobium oxides as anode materials of lithium-ion batteries for extreme fast charge applications. ACS Appl Energy Mater 2020;3:5657-65.
110. Liu G, Jin B, Zhang R, et al. Synthesis of Ti2Nb10O29/C composite as an anode material for lithium-ion batteries. Int J Hydrogen Energy 2016;41:14807-12.
111. Ashish A, Arunkumar P, Babu B, Manikandan P, Sarang S, Shaijumon M. TiNb2O7/Graphene hybrid material as high performance anode for lithium-ion batteries. Electrochimica Acta 2015;176:285-92.
112. Shi Y, Wang JZ, Chou SL, et al. Hollow structured Li3VO4 wrapped with graphene nanosheets in situ prepared by a one-pot template-free method as an anode for lithium-ion batteries. Nano Lett 2013;13:4715-20.
113. Shi Y, Gao J, Abruña HD, et al. The mechanism of the one-step synthesis of hollow-structured Li(3)VO(4) as an anode for lithium-ion batteries. Chemistry 2014;20:5608-12.
114. Luo L, Wu J, Xu J, Dravid VP. Atomic resolution study of reversible conversion reaction in metal oxide electrodes for lithium-ion battery. ACS Nano 2014;8:11560-6.
115. Cho JS, Hong YJ, Kang YC. Design and synthesis of bubble-nanorod-structured Fe2O3-carbon nanofibers as advanced anode material for li-ion batteries. ACS Nano 2015;9:4026-35.
116. Yuan S, Chen W, Zhang L, et al. Nitrogen-doped graphene-buffered Mn2O3 nanocomposite anodes for fast charging and high discharge capacity lithium-ion batteries. Small 2019;15:1903311.
117. Bai J, Xi B, Mao H, et al. One-step construction of N,P-codoped porous carbon sheets/CoP hybrids with enhanced lithium and potassium storage. Adv Mater 2018;30:e1802310.
118. Dong Y, Li Y, Shi H, et al. Graphene encapsulated iron nitrides confined in 3D carbon nanosheet frameworks for high-rate lithium ion batteries. Carbon 2020;159:213-20.
119. Cabana J, Monconduit L, Larcher D, Palacín MR. Beyond intercalation-based Li-ion batteries: the state of the art and challenges of electrode materials reacting through conversion reactions. Adv Mater 2010;22:E170-92.
120. Lu Y, Yu L, Lou XW. Nanostructured conversion-type anode materials for advanced lithium-ion batteries. Chem 2018;4:972-96.
121. Wang C, Zhao Y, Su D, et al. Synthesis of NiO Nano octahedron aggregates as high-performance anode materials for lithium ion batteries. Electrochimica Acta 2017;231:272-8.
122. Choi SH, Kang YC. Fe3O4-decorated hollow graphene balls prepared by spray pyrolysis process for ultrafast and long cycle-life lithium ion batteries. Carbon 2014;79:58-66.
123. Zhang J, Chu R, Chen Y, et al. MOF-derived transition metal oxide encapsulated in carbon layer as stable lithium ion battery anodes. J Alloys Compds 2019;797:83-91.
124. Yu X, Yu L, Lou XWD. Metal sulfide hollow nanostructures for electrochemical energy storage. Adv Energy Mater 2016;6:1501333.
125. Kummer M, Badillo JP, Schmitz A, et al. Silicon/polyaniline nanocomposites as anode material for lithium ion batteries. J Electrochem Soc 2013;161:A40-5.
126. Luo Z, Xiao Q, Lei G, Li Z, Tang C. Si nanoparticles/graphene composite membrane for high performance silicon anode in lithium ion batteries. Carbon 2016;98:373-80.
127. Kim H, Lee E, Sun Y. Recent advances in the Si-based nanocomposite materials as high capacity anode materials for lithium ion batteries. Mater Today 2014;17:285-97.
128. Su X, Wu Q, Li J, et al. Silicon-based nanomaterials for lithium-ion batteries: a review. Adv Energy Mater 2014;4:1300882.
129. Liu XH, Zhong L, Huang S, Mao SX, Zhu T, Huang JY. Size-dependent fracture of silicon nanoparticles during lithiation. ACS Nano 2012;6:1522-31.
130. Zuo X, Xia Y, Ji Q, et al. Self-templating construction of 3D hierarchical macro-/mesoporous silicon from 0D silica nanoparticles. ACS Nano 2017;11:889-99.
131. Chan CK, Peng H, Liu G, et al. High-performance lithium battery anodes using silicon nanowires. Nat Nanotechnol 2008;3:31-5.
132. Cui LF, Ruffo R, Chan CK, Peng H, Cui Y. Crystalline-amorphous core-shell silicon nanowires for high capacity and high current battery electrodes. Nano Lett 2009;9:491-5.
133. Tao H, Fan L, Qu X. Facile synthesis of ordered porous Si@C nanorods as anode materials for Li-ion batteries. Electrochimica Acta 2012;71:194-200.
134. Wang J, Meng X, Fan X, Zhang W, Zhang H, Wang C. Scalable synthesis of defect abundant si nanorods for high-performance li-ion battery anodes. ACS Nano 2015;9:6576-86.
136. Bensalah N, Kamand FZ, Zaghou M, Dawoud HD, Tahtamouni TA. Silicon nanofilms as anode materials for flexible lithium ion batteries. Thin Solid Films 2019;690:137516.
137. McDowell MT, Lee SW, Nix WD, Cui Y. 25th anniversary article: understanding the lithiation of silicon and other alloying anodes for lithium-ion batteries. Adv Mater 2013;25:4966-85.
138. Terranova ML, Orlanducci S, Tamburri E, Guglielmotti V, Rossi M. Si/C hybrid nanostructures for Li-ion anodes: an overview. J Power Sources 2014;246:167-77.
139. Gu M, Li Y, Li X, et al. In situ TEM study of lithiation behavior of silicon nanoparticles attached to and embedded in a carbon matrix. ACS Nano 2012;6:8439-47.
140. Cheng H, Shapter JG, Li Y, Gao G. Recent progress of advanced anode materials of lithium-ion batteries. J Energy Chem 2021;57:451-68.
141. Yan Y, Liu Y, Zhang Y, Qin C, Bakenov Z, Wang Z. Improving the cycling stability of three-dimensional nanoporous Ge anode by embedding Ag nanoparticles for high-performance lithium-ion battery. J Colloid Interface Sci 2021;592:103-15.
142. Wang X, Zhu S, Dong X, Huang H, Qi M. Ionic liquid assisted electrospinning synthesis for ultra-uniform Sn@ mesoporous carbon nanofibers as a flexible self-standing anode for lithium ion batteries. J Alloys Compds 2021;866:158984.
143. Jin Z, Ben L, Yu H, Zhao W, Huang X. A facile method to synthesize 3D structured Sn anode material with excellent electrochemical performance for lithium-ion batteries. Progress in Natural Science: Materials International 2020;30:456-60.
144. Zhang C, Wang X, Liang Q, et al. Amorphous phosphorus/nitrogen-doped graphene paper for ultrastable sodium-ion batteries. Nano Lett 2016;16:2054-60.
145. Chen X, Qiu J, Wang Y, et al. Cactus-like iron diphosphide@carbon nanotubes composites as advanced anode materials for lithium-ion batteries. Electrochimica Acta 2018;259:321-8.
146. Li X, Wang X, Sun J. Recent progress in the carbon-based frameworks for high specific capacity anodes/cathode in lithium/sodium ion batteries. New Carbon Materials 2021;36:106-16.
147. Liu W, Zhi H, Yu X. Recent progress in phosphorus based anode materials for lithium/sodium ion batteries. Energy Storage Materials 2019;16:290-322.
148. Liang S, Pei X, Jiang W, et al. Free-standing dual-network red phosphorus@porous multichannel carbon nanofibers/carbon nanotubes as a stable anode for lithium-ion batteries. Electrochimica Acta 2019;322:134696.
149. Yan Y, Xu H, Peng C, Zhang P, Yang J, Zheng S. 3D phosphorus-carbon electrode with aligned nanochannels promise high-areal-capacity and cyclability in lithium-ion battery. Appl Surf Sci 2019;489:734-40.
150. Sun L, Zhang Y, Si H, et al. TiO2-modified red phosphorus nanosheets entangled in carbon nanotubes for high performance lithium ion batteries. Electrochimica Acta 2019;297:319-27.
151. Yuan H, Jin Y, Chen X, Lan J, Yu Y, Yang X. Large-scale fabrication of egg-carton-inspired Bi/C composite toward high volumetric capacity and long-life lithium ion batteries. ACS Sustainable Chem Eng 2019;7:6033-42.
152. Deng Z, Liu T, Chen T, et al. Enhanced electrochemical performances of Bi2O3/rGO nanocomposite via chemical bonding as anode materials for lithium ion batteries. ACS Appl Mater Interfaces 2017;9:12469-77.
